简介概要

Ti36Zr40Ni20Pd4准晶的热稳定性与室温储氘性能

来源期刊:金属学报2010年第5期

论文作者:黄火根 陈亮 李嵘 罗德礼

文章页码:629 - 633

关键词:Ti-Zr-Ni-Pd合金; 准晶; 氘; 催化

Key words:Ti-Zr-Ni-Pd alloy; quasicrystal; deuterium; catalyzing

摘    要:在Ti40Zr40Ni20准晶合金中掺Pd制备了Ti36Zr40Ni20Pd4准晶合金,利用X射线衍射(XRD)、金相(OM)、光电子能谱(XPS)、气固反应等对其组织结构和吸氘特性进行了研究.结果表明,在吸铸态下该合金形成了二十面体准晶相,准晶格常数为0.5174 nm.其热力学稳定性较差,约400℃时转变为tI-Zr2Ni与C14-TiZrNiPd晶体相.室温下,其吸氘能力为11.0 mmol/g(相当于2.2%的吸氢质量分数),吸氘速率达到0.030 s-1,准晶结构不变但准晶格膨胀5.5%.添加的Pd起到催化作用,与初始合金相比,Ti36Zr40Ni20Pd4准晶合金的活化与储氘能力明显提高.

Abstract: Ti-Zr-Ni quasicrystals can absorb a large amount of hydrogen,so have strong application potential in the hydrogen energy field and international thermonuclear experimental reactor (ITER) program.However,the hydrogenation of the quasicrystals is often hindered and even poisoned due to their surface oxidation.To inhibit the oxidation,Pd has been selected,because of its catalysis to hydrogen absorption,as a minor alloying element in Ti-Zr-Ni quasicrystals. In this paper,the Ti36Zr40Ni20Pd4 alloy was designed and its thermal stability and roomtemperature deuteration were studied with XRD,DSC,OM,XPS and gas-solid reaction measurement apparatus.The XRD result shows that a single icosahedral quasicrystal(IQC) phase with a quasilattice constant αR=0.5174 nm was formed in the alloy by suction-casting method,which is metastable and transforms to conventional crystals tI-Zr2Ni and C14-TiZrNiPd(MgZn2 type) phase at about 400℃.The deuteration test below the transformed temperature indicates that the alloy can absorb deuterium up to a large concentration of 11.0 mmol/g(corresponding to 2.2%H, mass fraction) at room temperature after vacuuming and heating activation without any surface treatment.Once fully activated,the IQC can load deuterium rapidly with an absorption rate of 0.030 s-1 at ambient temperature,and has the quasilattice constant with about 5.5% expansion after two absorption cycles.The Ti36Zr40Ni20Pd4 IQC has better activation property and hydrogen capacity than the Ti40Zr40Ni20 IQC,which shows the catalyzing function of Pd.

详情信息展示

Ti36Zr40Ni20Pd4准晶的热稳定性与室温储氘性能

黄火根1,陈亮2,李嵘2,罗德礼2

(1.四川省绵阳市表面物理与化学国家重点实验室
2.中国工程物理研究院)

摘 要:在Ti40Zr40Ni20准晶合金中掺Pd制备了Ti36Zr40Ni20Pd4准晶合金,利用X射线衍射(XRD)、金相(OM)、光电子能谱(XPS)、气固反应等对其组织结构和吸氘特性进行了研究.结果表明,在吸铸态下该合金形成了二十面体准晶相,准晶格常数为0.5174 nm.其热力学稳定性较差,约400℃时转变为tI-Zr2Ni与C14-TiZrNiPd晶体相.室温下,其吸氘能力为11.0 mmol/g(相当于2.2%的吸氢质量分数),吸氘速率达到0.030 s-1,准晶结构不变但准晶格膨胀5.5%.添加的Pd起到催化作用,与初始合金相比,Ti36Zr40Ni20Pd4准晶合金的活化与储氘能力明显提高.

关键词:Ti-Zr-Ni-Pd合金; 准晶; 氘; 催化

<上一页 1 下一页 >

相关论文

  • 暂无!

相关知识点

  • 暂无!

有色金属在线官网  |   会议  |   在线投稿  |   购买纸书  |   科技图书馆

中南大学出版社 技术支持 版权声明   电话:0731-88830515 88830516   传真:0731-88710482   Email:administrator@cnnmol.com

互联网出版许可证:(署)网出证(京)字第342号   京ICP备17050991号-6      京公网安备11010802042557号