Microstructure evolution, Cu segregation and tensile properties of CoCrFeNiCu high entropy alloy during directional solidification
来源期刊：JOURNAL OF MATERIALS SCIENCE TECHNOLOG2020年第3期
论文作者：Huiting Zheng Ruirun Chen Gang Qin Xinzhong Li Yanqing Su Hongsheng Ding Jingjie Guo Hengzhi Fu
文章页码：19 - 27
摘 要：CoCrFeNiCu（equiatomic ratio） samples（? 8 mm） were directionally solidified at different velocities（10,30, 60 and 100 μm/s） to investigate the relationship between solidification velocity and microstructure formation, Cu micro-segregation as well as tensile properties. The results indicate that the morphology of the solid-liquid（S-L） interface evolves from convex to planar and then to concave with the increase of solidification velocity. Meanwhile, the primary and the secondary dendritic arm spacings decrease from100 μm to 10 μm and from 20 μm to 5 μm, respectively. They are mainly influenced by the axial heat transfer and grain competition growth. During directional solidification, element Cu is repelled from the FCC phase and accumulates in the liquid owe to its positive mixing enthalpy with other elements. Tensile testing results show that the ultimate tensile strength（UTS） gradually increases from 400 MPa to 450 MPa, and the strain of the specimen prepared at the velocity of 60 μm/s is higher than those of others.The fracture mode of all specimens is the mixed fracture containing both ductile fracture and brittle fracture, in which ductile fracture plays a fundamental role. In addition, the brittle fracture is induced by Cu segregation. The improvement of UTS is resulted from columnar grain boundary strengthening.
Huiting Zheng1，Ruirun Chen1,2，Gang Qin1，Xinzhong Li1，Yanqing Su1,2，Hongsheng Ding1，Jingjie Guo1，Hengzhi Fu1
1. National Key Laboratory for Precision Hot Processing of Metals, Harbin Institute of Technology2. State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology
摘 要：CoCrFeNiCu（equiatomic ratio） samples（? 8 mm） were directionally solidified at different velocities（10,30, 60 and 100 μm/s） to investigate the relationship between solidification velocity and microstructure formation, Cu micro-segregation as well as tensile properties. The results indicate that the morphology of the solid-liquid（S-L） interface evolves from convex to planar and then to concave with the increase of solidification velocity. Meanwhile, the primary and the secondary dendritic arm spacings decrease from100 μm to 10 μm and from 20 μm to 5 μm, respectively. They are mainly influenced by the axial heat transfer and grain competition growth. During directional solidification, element Cu is repelled from the FCC phase and accumulates in the liquid owe to its positive mixing enthalpy with other elements. Tensile testing results show that the ultimate tensile strength（UTS） gradually increases from 400 MPa to 450 MPa, and the strain of the specimen prepared at the velocity of 60 μm/s is higher than those of others.The fracture mode of all specimens is the mixed fracture containing both ductile fracture and brittle fracture, in which ductile fracture plays a fundamental role. In addition, the brittle fracture is induced by Cu segregation. The improvement of UTS is resulted from columnar grain boundary strengthening.
关键词：
