Analysis of filling process of Ti6Al4V alloy melt poured in permanent mold during centrifugal casting process

来源期刊：中国有色金属学报(英文版)2001年第3期

论文作者：盛文斌 李东 杨锐 刘羽寅 郭景杰 贾均

文章页码：353 - 357

Key words：flow status; Ti6Al4V alloy; cross-sectional area; permanent mold; centrifugal casting

Abstract: Ti6Al4V hip joint was foundered and the filling process of the melt poured in permanent mould during the centrifugal casting process was analyzed and the mathematical model of the filling process was established. Furthermore, the mathematical model was validated with a wax-model experiment. Calculating results show that the centrifugal field has an important influence on the filling process and the melt fills the mould with variational cross-sectional area and inclined angle. The cross-sectional area is in inverse proportion to the filling speed and its decreasing speed becomes fast with increasing rotating speed. The tangential value of the melt cross-sectional free-surface inclined angle is in direct proportion to the filling speed and the inclined angle increases with the filling length. Change curves of the cross-sectional inclined angle and area were obtained by the wax-model experiment when the rotating speeds were 60, 90 and 120 r/min respectively, which shows that the mathematical model is consistent with the experimental results.