高B4C相含量极细碳化硼粉的制取
来源期刊：中南大学学报(自然科学版)1989年第3期
论文作者：王零森 方寅初 蒋辉珍
文章页码：268 - 275
关键词：碳化硼； 振动球磨/酸洗； 极细粉
Key words：boron carbide； superfine powder； vibratory milling/acid washing
摘 要：用碳管炉硼酐碳热还原法制得了碳化硼粉,其化学成分和杂质含量符合中国国家标准和美国国家标准对一、二级核级粉末的要求,其B4C含量远高于按上述标准中化学成分折算的值。化学成分折算法经X射线内标法验证,证明是可靠的。两种方法获得的结果很接近。上述原始粗B4C粉经振动球磨和酸洗后获得了成分符合技术标准的微米级B4C细粉。实验证明:振动球磨的效率较滚动球磨高数倍甚至数十倍;振动球磨的平衡粒度和达到平衡粒度所需的时间也远低于普通球磨相应的值。
Abstract: A boron carbide powder whose chemical compositions and contents of impu- rities meet the requirements of China Standard and US Standard was produced by the reduction of boric acid with carbon in a carbon tube furnace. The B4C phase content of the powder has surpassed the calculated value from the chemical composition given by the above standards. The calculated value of B4C phase was verified by X-ray internal-standard-method. Such coarse powder was subjected to intensive vibratory milling and was acid-washed. A micron-fine powder with the chemical compositions being up to the Standard was gained. The present study- indicates that the effect of comminution in vibratory milling is several times, even dozens of times, as high as that in common ball milling. The equilibrium particle size is much smaller and the time required to reach the equilibrium particle size is also much shorter than that in common ball milling.
