Map-based control method for vehicle stability enhancement

Moon-Young Yoon¹, Seung-Hwan Baek¹, Kwang-Suk Boo², Heung-Seob Kim²

(1. Graduate school of Mechanical Engineering, Inje University 607, Obang-Dong,
Gimhae, Kyongnam, 621-749, Korea;
2. High Safety Vehicle Core Technology Research Center, Inje University 607,
Obang-Dong, Gimhae, Kyongnam, 621-749, Korea)

Abstract:This work proposes a map-based control method to improve a vehicle’s lateral stability, and the performance of the proposed method is compared with that of the conventional model-referenced control method. Model-referenced control uses the sliding mode method to determine the compensated yaw moment; in contrast, the proposed map-based control uses the compensated yaw moment map acquired by vehicle stability analysis. The vehicle stability region is calculated by a topological method based on the trajectory reversal method. A 2-DOF vehicle model and Pacejka’s tire model are used to evaluate the proposed map-based control method. The properties of model-referenced control and map-based control are compared under various road conditions and driving inputs. Model-referenced control uses a control input to satisfy the linear reference model, and it generates unnecessary tire lateral forces that may lead to worse performance than an uncontrolled vehicle with step steering input on a road with a low friction coefficient. However, map-based control determines a compensated yaw moment to maintain the vehicle within the stability region, so the typical responses of vehicle enable to converge rapidly. The simulation results with sine and step steering show that map-based control provides better the tracking responsibility and control performance than model-referenced control.

Key words:model-referenced control; map-based control; vehicle stability; yaw moment