Homogenization heat treatment of Mg-7.68Gd-4.88Y-1.32Nd-0.63Al-0.05Zr alloy
来源期刊：Journal of Rare Earths2014年第5期
论文作者：张国栋 李兴刚 马鸣龙 李永军 石国梁 袁家伟 张奎
文章页码：445 - 450
摘 要：The microstructures and mechanical properties of the Mg-7.68Gd-4.88Y-1.32Nd-0.63Al-0.05Zr magnesium alloy were investigated both in the as-cast condition and after homogenization heat treatment from 535 to 555 oC in the time range 0–48 h by optical microscopy, scanning electron microscopy and hardness measurement. The as-cast alloy consisted of α-Mg matrix, Mg5（Y0.5Gd0.5） phase which is a eutectic phase, strip of Al2（Y0.6Gd0.4） phase, little Al3Zr and Mg（Y3Gd） phase. With the increasing of homogenization temperature and time, the Mg5（Y0.5Gd0.5） phase was completely dissolved into the matrix. The Al2（Y0.6Gd0.4） phase was almost not dissolved which impeded grain boundaries motion making the grain size almost not changed in the process of homogenization. The optimum homogenization condition was 545 oC/16 h. The tensile strength increased, yield strength decreased and the plasticity improved obviously after 545 oC/16 h homogenization treatment.
张国栋，李兴刚，马鸣龙，李永军，石国梁，袁家伟，张奎
State Key Laboratory for Fabrication and Processing of Non-ferrous Metals, Beijing General Research Institute for Non-ferrous Metals
摘 要：The microstructures and mechanical properties of the Mg-7.68Gd-4.88Y-1.32Nd-0.63Al-0.05Zr magnesium alloy were investigated both in the as-cast condition and after homogenization heat treatment from 535 to 555 oC in the time range 0–48 h by optical microscopy, scanning electron microscopy and hardness measurement. The as-cast alloy consisted of α-Mg matrix, Mg5（Y0.5Gd0.5） phase which is a eutectic phase, strip of Al2（Y0.6Gd0.4） phase, little Al3Zr and Mg（Y3Gd） phase. With the increasing of homogenization temperature and time, the Mg5（Y0.5Gd0.5） phase was completely dissolved into the matrix. The Al2（Y0.6Gd0.4） phase was almost not dissolved which impeded grain boundaries motion making the grain size almost not changed in the process of homogenization. The optimum homogenization condition was 545 oC/16 h. The tensile strength increased, yield strength decreased and the plasticity improved obviously after 545 oC/16 h homogenization treatment.
关键词：
