连续退火炉中保护气氛及结构特性对带钢冷却特性的影响
来源期刊:钢铁2009年第10期
论文作者:潘良明 毛鸣汐
文章页码:46 - 50
关键词:连续退火; 快速冷却; 非稳态; 数值模拟
Key words:continuous annealing; rapid cooling; unsteady state; numerical simulation
摘 要:采用标准k-ε紊流模型,对连续退火炉中快冷段局部带钢的二维非稳态温度场进行CFD模拟,模拟与实际结果吻合较好。研究结果表明:从温度均匀性和冷却速度来看,当氢气体积分数为30%时,冷却效果最佳;控制最优的冷却速度可以通过控制带钢初始温度、带钢与风箱间距和冷却气体喷出速度、冷却介质的含量等参数来实现。
Abstract: The unsteady standard k-ε turbulence model was adopted to simulate the continuous annealing furnace steel cooling process,the simulation agrees the experimental results very well.The investigation shows that the temperature uniformity and cooling rate are optimized when the hydrogen concentration is 30%;by controlling the strip initial temperature,bellows-strip spacing,cooling media components ratio and jet rate of the cooling gas,controlled optimized cooling rate can be obtained.
潘良明1,毛鸣汐1
(1.重庆市重庆大学动力工程学院)
摘 要:采用标准k-ε紊流模型,对连续退火炉中快冷段局部带钢的二维非稳态温度场进行CFD模拟,模拟与实际结果吻合较好。研究结果表明:从温度均匀性和冷却速度来看,当氢气体积分数为30%时,冷却效果最佳;控制最优的冷却速度可以通过控制带钢初始温度、带钢与风箱间距和冷却气体喷出速度、冷却介质的含量等参数来实现。
关键词:连续退火; 快速冷却; 非稳态; 数值模拟