Design and development of a high-performance Ni-based superalloy WSU 150 for additive manufacturing
来源期刊：JOURNAL OF MATERIALS SCIENCE TECHNOLOG2020年第12期
论文作者：Praveen Sreeramagiri Ajay Bhagavatam Abhishek Ramakrishnan Husam Alrehaili Guru Prasad Dinda
文章页码：20 - 28
摘 要：This research proposes a design and development strategy of a new nickel-based superalloy for additive manufacturing.A new Ni-based superalloy has been developed by the application of the combinatorial alloy development technique coupled with CALPHAD based solidification modeling by effectively suppressing the precipitation kinetics.The suppression of precipitation during processing paved a way for prevention of cracks during deposition.The new alloy "WSU 150" revealed excellent room temperature mechanical properties with a yield strength of 867 MPa,an ultimate tensile strength of 1188 MPa,and an elongation of 27.9% in the as-deposited condition.The mechanical properties of the heat-treated alloy were improved significantly to 1114 MPa yield strength,1396 MPa ultimate tensile strength,and an elongation of 16.1%.Improvement in the mechanical properties is attributed to the additional precipitation and coarsening of γ’ and carbides during heat-treatment.Microstructural investigation of the alloy revealed spherical γ’ with a rippled size distribution from the center to the interdendritic region.The average size of the γ’ particles in the as-deposited condition was found to be around 48 nm in the interdendritic region.Heat-treatment promoted the coarsening of γ’ which is explained in the paper.
Praveen Sreeramagiri，Ajay Bhagavatam，Abhishek Ramakrishnan，Husam Alrehaili，Guru Prasad Dinda
Department of Mechanical Engineering, Wayne State University
摘 要：This research proposes a design and development strategy of a new nickel-based superalloy for additive manufacturing.A new Ni-based superalloy has been developed by the application of the combinatorial alloy development technique coupled with CALPHAD based solidification modeling by effectively suppressing the precipitation kinetics.The suppression of precipitation during processing paved a way for prevention of cracks during deposition.The new alloy "WSU 150" revealed excellent room temperature mechanical properties with a yield strength of 867 MPa,an ultimate tensile strength of 1188 MPa,and an elongation of 27.9% in the as-deposited condition.The mechanical properties of the heat-treated alloy were improved significantly to 1114 MPa yield strength,1396 MPa ultimate tensile strength,and an elongation of 16.1%.Improvement in the mechanical properties is attributed to the additional precipitation and coarsening of γ’ and carbides during heat-treatment.Microstructural investigation of the alloy revealed spherical γ’ with a rippled size distribution from the center to the interdendritic region.The average size of the γ’ particles in the as-deposited condition was found to be around 48 nm in the interdendritic region.Heat-treatment promoted the coarsening of γ’ which is explained in the paper.
关键词：
