Stability of Retained Austenite Through a Combined Intercritical Annealing and Quenching and Partitioning(IAQP) Treatment
来源期刊:Acta Metallurgica Sinica2015年第3期
论文作者:Ri-Ming Wu Wei Li Cheng-Lin Wang Yi Xiao Li Wang Xue-Jun Jin
文章页码:386 - 393
摘 要:Intercritical annealing(IA) at various temperatures followed by quenching and partitioning(IAQP) treatments was conducted on a cold-rolled Fe-0.2C-1.42Si-l.87Mn(wt%) sheet steel.Optimized microstructure and enhanced mechanical properties were achieved through appropriate adjustment of IA temperatures.The steel which was annealed at1,033 K for 600 s,then quenched to 573 K and partitioned at 693 K for 20 min,designated as 1033 QP steel,exhibits maximum 16.3 vol% retained austenite(RA) with good mechanical properties(ultimate tensile strength 886 MPa and total elongation 27%).It was found that the thermal and mechanical stabilities of RA are mainly influenced by the combined effect of its average carbon content and amount of adjacent martensite.Furthermore,the transformation-induced plasticity effect increased the peak n-values observed at the second stage of the work hardening of IAQP steels.
Ri-Ming Wu1,2,Wei Li1,Cheng-Lin Wang1,Yi Xiao1,Li Wang3,Xue-Jun Jin1
1. School of Materials Science and Engineering,Shanghai Jiao Tong University2. School of Materials Science and Engineering,Shanghai University3. State Key Lab of Development and Application Technology of Automotive Steels,Baosteel Research Institute
摘 要:Intercritical annealing(IA) at various temperatures followed by quenching and partitioning(IAQP) treatments was conducted on a cold-rolled Fe-0.2C-1.42Si-l.87Mn(wt%) sheet steel.Optimized microstructure and enhanced mechanical properties were achieved through appropriate adjustment of IA temperatures.The steel which was annealed at1,033 K for 600 s,then quenched to 573 K and partitioned at 693 K for 20 min,designated as 1033 QP steel,exhibits maximum 16.3 vol% retained austenite(RA) with good mechanical properties(ultimate tensile strength 886 MPa and total elongation 27%).It was found that the thermal and mechanical stabilities of RA are mainly influenced by the combined effect of its average carbon content and amount of adjacent martensite.Furthermore,the transformation-induced plasticity effect increased the peak n-values observed at the second stage of the work hardening of IAQP steels.
关键词: