Characterization of Band Sawing Dusts Generated in Cutting of Multi-crystalline Silicon Ingots
来源期刊：Journal Of Wuhan University Of Technology Materials Science Edition2010年第6期
论文作者：尹传强 周浪
文章页码：948 - 951
摘 要：Physical-chemical characteristics of the band sawing dusts regarding to recovery of pure silicon from them were investigated.The experimental results show 50vol%-60vol% amorphous phases exist in the dusts,which is mostly amorphous silica.The as-received saw dusts are found to form hard agglomerates of larger than 50 microns in diameter.The iron-based inclusions collected by magnets are found to match well with the band saw material in XRD patterns.Weight loss in heating was observed by thermal gravity tests,up to 900 ℃,presumably due to reaction of the amorphous silica with carbon contaminant in the dusts.The saw dusts were variously treated to examine their physical-chemical responses,and the results were also presented.
尹传强，周浪
School of Photovoltaics/School of Materials Science and Engineering,Nanchang University
摘 要：Physical-chemical characteristics of the band sawing dusts regarding to recovery of pure silicon from them were investigated.The experimental results show 50vol%-60vol% amorphous phases exist in the dusts,which is mostly amorphous silica.The as-received saw dusts are found to form hard agglomerates of larger than 50 microns in diameter.The iron-based inclusions collected by magnets are found to match well with the band saw material in XRD patterns.Weight loss in heating was observed by thermal gravity tests,up to 900 ℃,presumably due to reaction of the amorphous silica with carbon contaminant in the dusts.The saw dusts were variously treated to examine their physical-chemical responses,and the results were also presented.
关键词：
