简介概要

Hybrid Friction Stir Welding of High-carbon Steel

来源期刊:JOURNAL OF MATERIALS SCIENCE TECHNOLOG2011年第2期

论文作者:Don-Hyun Choi Chang-Yong Lee Byung-Wook Ahn Jung-Hyun Choi Seung-Boo Jung

文章页码:127 - 130

摘    要:A high-carbon steel joint,SK5(0.84 wt% C),was successfully welded by friction stir welding(FSW),both without and with a gas torch,in order to control the cooling rate during welding.After welding,the weld zone comprised gray and black regions,corresponding to microstructural variation:a martensite structure and a duplex structure of ferrite and cementite,respectively.The volume fraction of the martensite structure and the Vickers hardness in the welds were decreased with the using of the gas torch,which was related with the lower cooling rate.

详情信息展示

Hybrid Friction Stir Welding of High-carbon Steel

Don-Hyun Choi1,Chang-Yong Lee2,Byung-Wook Ahn1,Jung-Hyun Choi1,Seung-Boo Jung1

1. School of Advanced Materials Science and Engineering,Sungkyunkwan University 300 Cheoncheon-dong,Jangan-gu,Suwon,Gyeonggi-do 440-746,South Korea2. Department of Mechanical Engineering,Korea Advanced Institute of Science and Technology 335 Gwahangno,Yuseong-gu,Daejeon 305-701,South Korea

摘 要:A high-carbon steel joint,SK5(0.84 wt% C),was successfully welded by friction stir welding(FSW),both without and with a gas torch,in order to control the cooling rate during welding.After welding,the weld zone comprised gray and black regions,corresponding to microstructural variation:a martensite structure and a duplex structure of ferrite and cementite,respectively.The volume fraction of the martensite structure and the Vickers hardness in the welds were decreased with the using of the gas torch,which was related with the lower cooling rate.

关键词:

<上一页 1 下一页 >

相关论文

  • 暂无!

相关知识点

  • 暂无!

有色金属在线官网  |   会议  |   在线投稿  |   购买纸书  |   科技图书馆

中南大学出版社 技术支持 版权声明   电话:0731-88830515 88830516   传真:0731-88710482   Email:administrator@cnnmol.com

互联网出版许可证:(署)网出证(京)字第342号   京ICP备17050991号-6      京公网安备11010802042557号