简介概要

Hot deformation behavior and processing map of Mg-2Zn-1Al-0.2RE alloy

来源期刊:JOURNAL OF RARE EARTHS2020年第6期

论文作者:Yanxia Niu Jian Hou Fangkun Ning Xingrui Chen Yonghui Jia Qichi Le

文章页码:665 - 675

摘    要:In this study,uniaxial hot compression tests were carried out between 200 and 400℃ over strain rates of0.001-1 s-1 to investigate the hot deformation behavior of Mg-2 Zn-1 Al-0.2 RE alloy with coarse grains.The average activation energy was measured to be 174.51 kJ/mol.In addition,a constitutive relation based on the Arrhenius equation was established.Dynamic recrystallization(DRX) kinetics were studied by Avrami equation to characterize the evolution of DRX volume fraction.DRX was favored at high temperatures of 300-400℃ and low strain rates of 0.001-0.01 s-1.According to dynamic material model and Prasad’s instability criterion,a maximum power dissipation of 38% and 32% occurs at 400℃/0.001 s-1 and 400℃/0.01 s-1,respectively.According to the proce ssing map,330-400℃/0.001-0.01 s-1was determined as the optimum deformation parameter range.

详情信息展示

Hot deformation behavior and processing map of Mg-2Zn-1Al-0.2RE alloy

Yanxia Niu,Jian Hou,Fangkun Ning,Xingrui Chen,Yonghui Jia,Qichi Le

Key Laboratory of Electromagnetic Processing of Materials,Ministry of Education,Northeastern University

摘 要:In this study,uniaxial hot compression tests were carried out between 200 and 400℃ over strain rates of0.001-1 s-1 to investigate the hot deformation behavior of Mg-2 Zn-1 Al-0.2 RE alloy with coarse grains.The average activation energy was measured to be 174.51 kJ/mol.In addition,a constitutive relation based on the Arrhenius equation was established.Dynamic recrystallization(DRX) kinetics were studied by Avrami equation to characterize the evolution of DRX volume fraction.DRX was favored at high temperatures of 300-400℃ and low strain rates of 0.001-0.01 s-1.According to dynamic material model and Prasad’s instability criterion,a maximum power dissipation of 38% and 32% occurs at 400℃/0.001 s-1 and 400℃/0.01 s-1,respectively.According to the proce ssing map,330-400℃/0.001-0.01 s-1was determined as the optimum deformation parameter range.

关键词:

<上一页 1 下一页 >

相关论文

  • 暂无!

相关知识点

  • 暂无!

有色金属在线官网  |   会议  |   在线投稿  |   购买纸书  |   科技图书馆

中南大学出版社 技术支持 版权声明   电话:0731-88830515 88830516   传真:0731-88710482   Email:administrator@cnnmol.com

互联网出版许可证:(署)网出证(京)字第342号   京ICP备17050991号-6      京公网安备11010802042557号