Experimental study on sulfur removal from ladle furnace refining slag in hot state by blowing Air
来源期刊：International Journal of Minerals Metallurgy and Materials2016年第1期
论文作者：Li-hua Zhao Lu Lin Qi-fan Wu
文章页码：33 - 39
摘 要：In view of the present problem of sulfur enrichment in the metallurgical recycling process of ladle furnace（LF） refining slag, a simple and efficient method of removing sulfur from this slag was proposed. The proposed method is compatible with current steelmaking processes. Sulfur removal from LF refining slag for SPHC steel（manufactured at a certain steel plant in China） by blowing air in the hot state was studied by using hot-state experiments in a laboratory. The FactS age software, a carbon/sulfur analyzer, and scanning electron microscopy in conjunction with energy-dispersive X-ray spectroscopy were used to test and analyze the sulfur removal effect and to investigate factors influencing sulfur removal rate. The results show that sulfur ions in LF refining slag can be oxidized into SO2 by O2 at high temperature by blowing air into molten slag; SO2 production was observed to reach a maximum with a small amount of blown O2 when the temperature exceeded 1350°C. At 1370°C and 1400°C, experimental LF refining slag is in the liquid state and exhibits good fluidity; under these conditions, the sulfur removal effect by blowing air is greater than 90wt% after 60 min. High temperature and large air flow rate are beneficial for removing sulfur from LF refining slag; compared with air flow rate, temperature has a greater strongly influences on the sulfur removal.
Li-hua Zhao1，Lu Lin2，Qi-fan Wu1
1. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing2. State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing
摘 要：In view of the present problem of sulfur enrichment in the metallurgical recycling process of ladle furnace（LF） refining slag, a simple and efficient method of removing sulfur from this slag was proposed. The proposed method is compatible with current steelmaking processes. Sulfur removal from LF refining slag for SPHC steel（manufactured at a certain steel plant in China） by blowing air in the hot state was studied by using hot-state experiments in a laboratory. The FactS age software, a carbon/sulfur analyzer, and scanning electron microscopy in conjunction with energy-dispersive X-ray spectroscopy were used to test and analyze the sulfur removal effect and to investigate factors influencing sulfur removal rate. The results show that sulfur ions in LF refining slag can be oxidized into SO2 by O2 at high temperature by blowing air into molten slag; SO2 production was observed to reach a maximum with a small amount of blown O2 when the temperature exceeded 1350°C. At 1370°C and 1400°C, experimental LF refining slag is in the liquid state and exhibits good fluidity; under these conditions, the sulfur removal effect by blowing air is greater than 90wt% after 60 min. High temperature and large air flow rate are beneficial for removing sulfur from LF refining slag; compared with air flow rate, temperature has a greater strongly influences on the sulfur removal.
关键词：
