简介概要

The Properties of Solution Precursor Plasma Spray Nanostructured Thermal Barrier Coatings

来源期刊:Journal Of Wuhan University Of Technology Materials Science Edition2010年第6期

论文作者:闵捷

文章页码:924 - 928

摘    要:About 300 μm thickness uniform thermal barrier coatings (TBCs) were deposited on the 1Cr18Ni9Ti samples by solution precursor plasma spray (SPPS).The analysis methods,such as TEM,SEM,and XRD were used to characterize the coatings in the aspects of microstructure and phase compositions.The samples were quenched from 1121 ℃ to room temperature by forced-air to measure the thermal cycling capability.Coatings density were measured by means of water displacement.The experimental results show that grain size of the SPPS TBCs is about 30 nm with desired tetragonal phase ZrO2,and the SPPS TBCs(with 16% porosity) consist of arcuate pores,gelatin and melted particles.The hardness of the coatings is HR45Y38.5 and bond strength between coatings and substrates is 24.2 MPa.The thermal shock test show the coatings have a average life of 500 cycles which is about 2.5 times than that of conventional air plasma spray (APS) TBCs.

详情信息展示

The Properties of Solution Precursor Plasma Spray Nanostructured Thermal Barrier Coatings

闵捷

State Key Laboratory of Advanced Technology for Materials Synthesis and Processing,Wuhan University of Technology

摘 要:About 300 μm thickness uniform thermal barrier coatings (TBCs) were deposited on the 1Cr18Ni9Ti samples by solution precursor plasma spray (SPPS).The analysis methods,such as TEM,SEM,and XRD were used to characterize the coatings in the aspects of microstructure and phase compositions.The samples were quenched from 1121 ℃ to room temperature by forced-air to measure the thermal cycling capability.Coatings density were measured by means of water displacement.The experimental results show that grain size of the SPPS TBCs is about 30 nm with desired tetragonal phase ZrO2,and the SPPS TBCs(with 16% porosity) consist of arcuate pores,gelatin and melted particles.The hardness of the coatings is HR45Y38.5 and bond strength between coatings and substrates is 24.2 MPa.The thermal shock test show the coatings have a average life of 500 cycles which is about 2.5 times than that of conventional air plasma spray (APS) TBCs.

关键词:

<上一页 1 下一页 >

有色金属在线官网  |   会议  |   在线投稿  |   购买纸书  |   科技图书馆

中南大学出版社 技术支持 版权声明   电话:0731-88830515 88830516   传真:0731-88710482   Email:administrator@cnnmol.com

互联网出版许可证:(署)网出证(京)字第342号   京ICP备17050991号-6      京公网安备11010802042557号