Deposition of FeCoNiCrMn high entropy alloy(HEA) coating via cold spraying
来源期刊：JOURNAL OF MATERIALS SCIENCE TECHNOLOG2019年第6期
论文作者：Shuo Yin Wenya Li Bo Song Xingchen Yan Min Kuang Yaxin Xu Kui Wen Rocco Lupoi
文章页码：1003 - 1007
摘 要：High entropy alloys（HEAs） are of great interest in the community of materials science and engineering due to their unique phase structure. They are constructed with five or more principal alloying elements in equimolar or near-equimolar ratio. Therefore, HEAs can derive their performance from multiple principal elements rather than a single element. In this work, solid-state cold spraying（CS） was applied for the first time to produce FeCoNiCrMn HEA coating. The experimental results confirm that CS can be used to produce a thick HEA coating with low porosity. As a low-temperature deposition process, CS completely retained the HEA phase structure in the coating without any phase transformation. The characterization also reveals that the grains in the CSed HEA coating had experienced significant refinement as compared to those in the as-received HEA powder due the occurrence of dynamic recrystallization at the highly deformed interparticle region. Due to the increased dislocation density and grain boundaries,CSed HEA coating was much harder than the as-received powder. The tribological study shows that the CSed FeCoNiCrMn HEA coating resulted in lower wear rate than laser cladded HEA coatings.
Shuo Yin，Wenya Li，Bo Song，Xingchen Yan，Min Kuang，Yaxin Xu，Kui Wen，Rocco Lupoi
摘 要：High entropy alloys（HEAs） are of great interest in the community of materials science and engineering due to their unique phase structure. They are constructed with five or more principal alloying elements in equimolar or near-equimolar ratio. Therefore, HEAs can derive their performance from multiple principal elements rather than a single element. In this work, solid-state cold spraying（CS） was applied for the first time to produce FeCoNiCrMn HEA coating. The experimental results confirm that CS can be used to produce a thick HEA coating with low porosity. As a low-temperature deposition process, CS completely retained the HEA phase structure in the coating without any phase transformation. The characterization also reveals that the grains in the CSed HEA coating had experienced significant refinement as compared to those in the as-received HEA powder due the occurrence of dynamic recrystallization at the highly deformed interparticle region. Due to the increased dislocation density and grain boundaries,CSed HEA coating was much harder than the as-received powder. The tribological study shows that the CSed FeCoNiCrMn HEA coating resulted in lower wear rate than laser cladded HEA coatings.
关键词：
