共搜索到8821条信息,每页显示10条信息,共883页。用时:0小时0分0秒573毫秒
Precipitate-Accommodated Plasma Nitriding for Aluminum Alloys Patama Visittipitukul1,Hideyuki Kuwahara2,Tatsuhiko Aizawa3 (1.Department of Metallurgical Engineering, Chulalongkorn University... the strength and wear resistance of aluminum alloy parts in automotives. Long duration time as well as long pre-sputtering time are required for plasma nitriding of aluminum or its alloys only......
Research of Tribological Behaviors of a New Aluminum Bronze WANG Zhi-ping1,XU Jian-lin1,CHEN Chao2 (1.State Key Lab of Gansu New Non-ferrous Metal Materials, Lanzhou University of Science... strength and wear resistant aluminum bronze, with its friction coefficient and wear-rate lower than those of ZQAl9-4 and ZQAl10-4-4 alloys in terms of Chinese national standard.The results showed......
The Technological Improvements of Aluminum Alloy Coloring by Electrolysis LI Nai-jun1 (1.Teachers College, Shenyang University, Shenyang 110015, P. R. China) 摘要:The technological process of coloring golden-tawny on aluminum alloy by electrolysis was improved in this paper. The optimum composition of electrolyte was found, the conditions of deposition and anodic oxidation by electrolysis were......
Microstructure of Nitrided Aluminum Alloys Using an Electron-Beam-Excited-Plasma (EBEP) H.Shoyama1,T.Hara1,L.Liu2,T.Hishida1,H. Tsubakino2,A.Yamamoto2 (1.Faulty of Engineering, Toyota Technological Institute, Nagoya 468-8511, Japan;2.Graduate School, University of Hyogo, 2167 Shosha, Himeji, 671-2201, Japan) 摘要:Nitriding of surface of aluminum alloys was carried out with using an electron-beam......
Trans. Nonferrous Met. Soc. China 22(2012) s656-s660 Microforming of superplastic 5083 aluminum alloy Md. Abu Mowazzem HOSSAIN1, Sung-Tae HONG1, Kyu-Yeol PARK1, Young-Sang NA2 1. School of Mechanical...: The mechanical behavior of superplastic 5083 aluminum alloy during microforming process was investigated by finite element analysis. A micro V-groove die was modeled to analyze the effects of forming......
Tensile property of Al-Si closed-cell aluminum foam YU Hai-jun(尉海军), YAO Guang-chun(姚广春), LIU Yi-han(刘宜汉) School of Materials and Metallurgy, Northeastern University, Shenyang 110004, China Received 2 February 2006; accepted 11 June 2006 Abstract: Al-Si closed-cell aluminum foams of different densities were prepared by molten body transitional foaming process. The tensile behavior of Al-Si......
Self-lubricated Array Film of Amorphous Carbon Nanorods on an Aluminum Substrate TU Jiang-ping1,JIANG Chun-xi2,GUO Shao-yi3,FU Ming-fu2,ZHAO Xin-bing1 (1.Department of Materials Science... of Science, Hangzhou, China) 摘要:A self-lubricated array film of amorphous carbon nanorods was prepared by chemical catalytic pyrolysis of acetylene on the anodic aluminum oxide membrane fabricated by two......
Portevin-Le Chatelier effect in Al-Zn-Mg-Cu-Zr aluminum alloy CHEN Jun-zhou(陈军洲)1, 2, ZHEN Liang(甄良)1, FAN Li-wei(樊立伟)3, YANG Shou-jie(杨守杰)2, DAI Sheng-long(戴圣龙)2, SHAO Wen-zhu(邵文柱)1...; Abstract: Portevin-Le Chatelier (PLC) effect in a severely cold-rolled Al-Zn-Mg-Cu-Zr aluminum alloy (AA7055 type) plate before and after......
s......
Recycling of automotive aluminum Jirang CUI, Hans J. ROVEN Department of Materials Science and Engineering, Norwegian University of Science and Technology (NTNU), Alfred Getz vei 2, NO7491 Trondheim, Norway Received 23 October 2009; accepted 30 March 2010 Abstract: With the global warming of concern, the secondary aluminum stream is becoming an even more important component of aluminum......