共搜索到10297条信息，每页显示10条信息，共1030页。用时：0小时0分0秒671毫秒
Coating thickness control in continuously fabricating metallic glass-coated composite wiresBao-yu Zhang,Xiao-hua Chen,Zhao-ping Lu,Xi-dong HuiState Key Laboratory for Advanced Metals and Materials.... The effects of processing parameters, including the drawing velocity and coating temperature, on the coating thickness were investigated. It is found that the coating thickness increases......
Finite element analysis on stresses field of normalized layer thickness within ceramic coating on aluminized steel WU Zhen-qiang(吴振强), XIA Yuan(夏 原), LI Guang(李 光), XU Fang-tao(徐方涛) Institute... by the thickness ratio of Al layer when the total thickness of coating is unchanged. With the increase of Al layer thickness, the surface tensile stress rises quickly. When Al2O3 layer thickness increases......
J. Cent. South Univ. Technol. (2010) 17: 899-905 DOI: 10.1007/s11771-010-0574-5 Effects of thickness and elastic modulus on stress condition of fatigue-resistant coating under rolling contact... thicknesses and elastic modulus ratios of coating to substrate were introduced, and the effects of thickness and elastic modulus ratio on the stresses were addressed. The calculation results show......
Effect of coating thickness on microstructures and mechanical properties of C/Cu/Al composites CAO Zhuo-kun(曹卓坤), YAO Guang-chun(姚广春), LIU Yi-han(刘宜汉) School of Materials and Metallurgy..., EDX analysis. The results of tensile tests indicate that composites fabricated using carbon fibers with 0.7-1.1 μm copper coating perform best and the composites turn to more brittle as the thickness......
......
the corrosion resistance of magnet. The influences of coating thickness and sputtering power on microstructure and corrosion resistance of Al coating were investigated. The surface morphology of Al coating... at 51-82 W. Key words: NdFeB; aluminum coatings; magnetron sputtering; corrosion resistance; coating thickness 1 Introduction Sintered NdFeB magnets have been widely used for their high remanence......
Effects of thickness of Al thermal spray coating for STS 304 Min-Su HAN1, Yong-Bin WOO1, Seok-Cheol KO2, Young-Jae JEONG3, Seok-Ki JANG1, Seong-Jong KIM1 1. Division of Marine Engineering, Mokpo... micro-cells formed by the base metal and the thermal spray coating act as cathodes and anodes, respectively. The coating thickness has little effect on the surface morphology of the coating. However......
Synthesis and Characterization of Electroless Ni-P/Ni-Mo-P Duplex Coating with Different Thickness CombinationsGong-Sheng Song1,2,Shuo Sun2,Zhong-Chi Wang1,Cheng-Zhi Luo1,Chun-Xu Pan1,31. School... resistance. In addition, experimental results revealed that for a total 20 μm coating thickness, the duplex coating with a 7 μm of the Ni-Mo-P coating exhibited the best corrosion resistance in 0.5 mol/L......
, and its thickness is about 85μm. The dark outer layer which is the body of the coating consists of MoSi2 with an average thickness of 70μm. Between the MoSi2 layer and the substrate...Morphology and structure of high temperature MoSi2 coating on niobium XIAO Lai-rong(肖来荣), YI Dan-qing(易丹青), YIN Lei(殷 磊), CAI hi-gang(蔡志刚) (College of Materials Science and Engineering......
Trans. Nonferrous Met. Soc. China 22(2012) 2092-2097 Effect of pattern coating thickness on characteristics of lost foam Al-Si-Cu alloy casting Majid KARIMIAN1, 2, Ali OURDJINI2, Mohd HASBULLAH... coating thickness on casting imperfection and porosity percentage as well as eutectic silicon spacing of the alloy. The results showed that increasing slurry viscosity and flask dipping time influenced......
