共搜索到11448条信息,每页显示10条信息,共1145页。用时:0小时0分0秒421毫秒
-laminated composites were fabricated by hot roll bonding and subsequent processes: cryorolling(-190 ℃ and-100 ℃), cold rolling(25 ℃), and hot rolling(300 ℃). Their bonding strength and mechanical properties were then studied by an Autograph AGS-X universal electronic testing machine. The results show that cryorolling can improve the interface bonding strength and tensile strength of Al/Ti/Allaminated......
of this study were to produce ultrafine-grained(UFG) AA2024 aluminum alloy by cryorolling followed by aging and to evaluate its corrosion behavior. Solutionized samples were cryorolled to 85% reduction......
Effect of Post Cryorolling Treatments on Microstructural and Mechanical Behaviour of Ultrafine Grained Al-Mg-Si AlloyP.Nageswara rao,Dharmendra Singh,R.JayaganthanDepartment of Metallurgical and Materials Engineering,Indian Institute of Technology Roorkee摘 要:To investigate the effect of post cryorolling treatments on simultaneous enhancement in strength......
Influence of Cryorolling on the Precipitation of Cu–Ni–Si Alloys: An In Situ X-ray Diffraction StudyWei Wang1,Zong-Ning Chen1,En-Yu Guo1,Hui-Jun Kang1,Yi Liu2,Cun-Lei Zou1,Ren-Geng Li1,Guo-Mao... Synchrotron Radiation Facility, Shanghai Institute of Applied Physics, Chinese Academy of Sciences摘 要:The effect of cryorolling on the precipitation......
Microstructures and impact toughness behavior of Al 5083 alloy processed by cryorolling and afterwards annealingDharmendra Singh,P.Nageswara Rao,R.JayaganthanDepartment of Metallurgical and Materials... from-190℃ to 100℃.It is observed that increasing the percentage of reduction of samples during cryorolling has significant effect on decreasing impact toughness at all temperatures by increasing yield......
Mechanical Properties and Microstructural Evolution of Bulk UFG Al 2014 Alloy Processed Through Cryorolling and Warm RollingR.Jayaganthan摘 要:Tensile properties,microstructural evolution and fracture toughness of A1 2014 alloy subjected to cryorolling followed by warm rolling(CR + WR)have been investigated in the present study.The solution-treated(ST)A1......
Clausthal-Zellerfeld, Germany & Helmholtz Zentrum Geesthacht, Max Planck 1, D-21502 Geesthacht, Germany Received 22 February 2016; accepted 12 October 2016 Abstract: The influence of cryorolling... and suppression of galvanic cell, respectively. Key words: aluminum alloy; cryorolling; mechanical property; corrosion potential; precipitation 1 Introduction Al-Mg-Si alloys are widely used as structural......
Trans. Nonferrous Met. Soc. China 30(2020) 2472-2479 Effect of cryorolling on microstructure and property of high strength and high conductivity Cu-0.5wt.%Cr alloy Peng-chao ZHANG1,2, Jie-fu SHI1...: Cu-0.5wt.%Cr alloy with high strength and high conductivity was processed by cryorolling (CR) and room temperature rolling (RTR), respectively. The microstructure, mechanical property and electrical......
Trans. Nonferrous Met. Soc. China 30(2020) 2904-2914 Microstructure evolution and mechanical properties of Al-3.6Cu-1Li alloy via cryorolling and aging Chang LI1,2, Han-qing XIONG1,2, Laxman... February 2020; accepted 19 July 2020 Abstract: An Al-3.6Cu-1Li alloy was subjected to room temperature rolling and cryorolling to investigate their effects on microstructure evolution and mechanical......
Trans. Nonferrous Met. Soc. China 29(2019) 595-600 High strength and high electrical conductivity CuMg alloy prepared by cryorolling Yun-xiang TONG1, Si-yuan LI1, Dian-tao ZHANG1, Li LI1, Yu-feng... strengthening and dislocation strengthening. Key words: CuMg alloy; cryorolling; mechanical properties; grain size; twin 1 Introduction In recent years, Cu-based alloys have attracted much attention......