共搜索到298条信息,每页显示10条信息,共30页。用时:0小时0分0秒625毫秒
of the main-stream digital printing techniques. Inkjet technologies are usually divided into continuous and drop-on-demand (DOD) printing methods[1]. Among them, the majority of activity in inkjet printing today is in the DOD methods because of their low cost and high printing quality, and color capability[2]. In the thermal inkjet printer, a thin film resistor heater which converts an electrical......
challenge in printable electronics fabrication is to effectively and accurately control a drop-on-demand (DoD) inkjet printhead for high printing quality. In this work, an optimal prediction model...Analysis of DoD inkjet printhead performance forprintable electronics fabrication using dynamic lumped element modeling andswarm intelligence based optimal predictionHE Mao-wei(何茂伟)1, SUN Li-ling(孙丽玲......
], stereolithography (SLA) [16], direct inkjet printing (DIP) [17], and 3D gel-printing (3DGP) [18], etc. Among these technologies, 3DGP is an attractive method to prepare HVHSS, using highly loaded.... DOI: 10.1016/j.scriptamat. 2020.06.006. [17] LI B, HU N T, SU Y J, YANG Z, SHAO F, LI G, ZHANG C R, ZHANG Y F. Direct inkjet printing of aqueous inks to flexible all-solid-state graphene hybrid micro......
and future perspectives [J]. Rapid Prototyping J, 2006, 12(3): 136-147. [7] DE GANS B J, DUINEVEL P C, SCHUBERT U S. Inkjet printing of polymers: State of the art and future developments [J]. Adv Mat...J. Cent. South Univ. Technol. (2008) 15(s1): 088-092 DOI: 10.1007/s11771-008-321-3 Rheological characteristics of drug-loaded microemulsions and their printability in three dimensional printing......
luminescent inks for creating highly secured and fluorescent-based anti-counterfeiting patterns via inkjet printing. Key words: lanthanide-doped fluoride; core-shell structure; dual-mode luminescence; inkjet printing; anti- counterfeiting 1 Introduction Nowadays, counterfeit products have significant impact on the interests of consumers and cause huge business economic losses [1,2]. Developing......
Rapid manufacture of Ni-based superalloy components by three-dimensional printing LIU Jian-xin(刘建新), H. A. KUHN ProMetal Division, The Ex One Company, 8075 Pennsylvania Avenue, Irwin, PA 15642... was used to build green preforms by three-dimensional printing and then sintered at a temperature above the solidus temperature of the coarse prealloyed powder and below the melting temperature......
): 151-161. [7] SAKAI Y, FUTAKUCHI T, IIJIMA T. Preparation of (Ba,Sr)TiO3 thick film on ZrO2 substrates by inkjet printing [J]. Japanese Journal of Applied Physics, 2006, 45(2): 846-849. [8] MOUGENOT M... Barium titanate ceramic inks for continuous ink-jet printing synthesized by mechanical mixing and sol-gel methods ZHOU Zhen-jun(周振君)1, YANG Zheng-fang(杨正方)2, YUAN Qi-ming(袁启明)2 1. College......
1 Introduction The thermal inkjet printer has emerged as one of the mainstream digital printing technologies because it is relatively less expensive to manufacture and is easily adaptable to color printing applications [1]. Inkjet technologies are usually divided into continuous and drop-on-demand (DOD) printing methods. The DOD inkjet printhead is used most widely for small office and home......
Trans. Nonferrous Met. Soc. China 24(2014) 1836-1843 Simulation on deposition and solidification processes of 7075 Al alloy droplets in 3D printing technology Hai-peng LI1, He-jun LI1, Le-hua QI2... the drop-on-demand three dimensional (3D) printing method, based on the volume of fluid (VOF) method, a 3D numerical model was employed. In this model, the 7075 alloy with larger temperature range......
J. Cent. South Univ. (2021) 28: 1078-1088 DOI: https://doi.org/10.1007/s11771-021-4681-2 Sintering properties of in situ Ti-TiB microlattices created by 3D extrusion printing of TiH2+TiB2 inks SONG...,Evanston, IL 60208, USA Central South University Press and Springer-Verlag GmbH Germany, part of Springer Nature 2021 Abstract: A direct 3D extrusion printing technique was used to produce Ti-TiB......