共搜索到25725条信息,每页显示10条信息,共2573页。用时:0小时0分0秒765毫秒
Effect of pouring temperature on fractal dimension of primary phase morphology in semi-solid A356 alloy LIU Zheng(刘 政)1, 2, MAO Wei-min(毛卫民)3, LIU Xiao-mei(刘小梅)2 1. Jiangxi Nonferrous... in semi-solid A356 alloy prepared by low superheat pouring and slightly electromagnetic stirring were calculated, and the effect of pouring temperature on fractal dimension of primary phase......
Effect of pouring temperature on semi-solid slurry of A356 Al alloy prepared by weak electromagnetic stirring LIU Zheng(刘 政) 1, 2, MAO Wei-min(毛卫民)1, ZHAO Zheng-duo(赵振铎)1 1...; Abstract: The semi-solid slurry of A356 Al alloy was manufactured by low superheat pouring and weak electromagnetic stirring. The effects of pouring temperature on the slurry......
Effect of pouring temperature on thixotropic microstructure formation of AZ91NING Zhiliang1),WU Peilian1),Wang H.2),CAO Fuyang1),and SUN Jianfei1)1) School of Materials Science & Engineering...="ChDivSummary">The effect of pouring temperature on thixotropic microstructure of AZ91 was investigated.The results show that the pouring temperature has a pronounced effect both on microstructural morphology......
Center Distance and Pouring Temperature on in-situ Synthesis of WCP/Fe Composite Coating牛立斌,WANG Xiaogang,FAN ZiminCollege of Materials Science and Engnieering, Xi′an University of Science... composite coatings were obtained by adjusting the pouring temperature and the center distance of tungsten wires, and were comparatively observed by X-ray diffraction, scanning electron microscopy......
Effects of Pouring Temperature on Interfacial Reaction between Ti-47.5Al-2.5V-1Cr Alloy and Mold during Centrifugal Casting隋艳伟,FENG Kun,CHENG Cheng,CHEN Xiao,戚继球,HE Yezeng,MENG Qingkun,WEI Fuxiang,SUN ZhiSchool of Materials Science and Engineering, China University of Mining and Technology摘 要:Pouring temperature and time are the most important......
......
Effect of pouring temperature on cooling slope casting of semi-solid Al-Si-Mg alloyProsenjit Das1,Sudip K. Samanta1,Himadri Chattopadhyay2,Pradip Dutta31. Foundry Group, CSIR-Central Mechanical... to simulate the liquid metal flow through cooling slope using Eulerian two-phase flow approach and to investigate the effect of pouring temperature on cooling slope semi-solid slurry generation process......
Influences of pouring temperature and cooling rate on microstructure and mechanical properties of casting Al-Si-Cu aluminum alloyXiaowu HU,Fanrong AI and Hong YAN School of Mechanical Electrical Engineering,Nanchang University,Nanchang 330031,China摘 要:This paper investigated the influences of pouring temperature and cooling rate on the microstructure......
Effect of Pouring Temperature on Microstructure and Properties of A356 Alloy Strip by a Novel Semisolid Micro Fused-Casting for Metal罗晓强1,2,韩永军1,LI Qingbin1,HU Xiaoming1,LI Yanling1,ZHOU Yanbiao11...">A novel semisolid micro fused-casting(MFC) for preparing A356 alloy strips is proposed, and the effects of process parameters of pouring temperature on the microstructure and properties of A356 alloy strips......
that mold temperature shows much more significant influence on the HTS of both alloys than pouring temperature whose influence only can be distinguished at low mold temperature (341 K for AZ91D alloy... alloy, 1003-1033 K and ≥623 K for NZ30K alloy, respectively. Key words: AZ91D alloy; Mg-3Nd-0.2Zn-Zr; hot tearing susceptibility; pouring temperature; mold temperature 1 Introduction As the lightest......