共搜索到3381条信息,每页显示10条信息,共339页。用时:0小时0分0秒540毫秒
Tensile properties and microstructure of AZ31B magnesium alloy sheet processed by repeated unidirectional bending HUANG Guang-sheng(黄光胜)1,2, LI Hong-cheng(李红成)1,2, SONG Bo(宋 波)1,2, ZHANG Lei(张 雷...; Abstract: The mechanical properties of the AZ31B magnesium alloy sheet processed by repeated unidirectional bending (RUB) with a basal pole tilted in the rolling......
and mechanical properties of AZ31B magnesium alloy sheets processed by repeated unidirectional bending [J]. Journal of Alloys and Compounds, 2010,489:475-481. [16] CHEN Zhen-hua. Wrought magnesium alloy... processed by repeated unidirectional bending [J]. Transactions of Nonferrous Metals Society of China, 2010,20(1): 28-33. [18] YOSHINAGA H, HORIUCHI R. On the flow stress of α solid solution Mg-Li alloy......
of AZ31B magnesium alloy sheet can be improved by repeated unidirectional bending (RUB) process through control of (0002) basal texture. Compared with as-received sheet, the Erichsen value (IE... underwent RUB process. It provides an alternative to the electronics industry in the application of magnesium alloys. Key words: magnesium alloy sheet; repeated unidirectional bending; cold stamping......
September 2010; accepted 22 December 2010 Abstract: The effect of the repeated unidirectional bending (RUB) process and annealing on the formability of magnesium alloy sheets was investigated. The RUB... the deformation twin enhanced by grain coarsening can accommodate the strain of thickness. Key words: magnesium alloy sheet; repeated unidirectional bending; microstructure; texture; formability 1 Introduction......
; accepted 20 December 2010 Abstract: Repeated unidirectional bending (RUB) was carried out to improve the texture of commercial AZ31B magnesium alloy sheets. All specimens were prepared in the rolling.... Key words: magnesium alloy sheet; repeated unidirectional bending; texture; formability; forming limit diagram 1 Introduction As the lightest metal structural material, magnesium alloys have been......
with the scheduled bending radius once the tube materials are drawn past the bending tangent point, and the subsequent deformation is regarded as the repeated similar deformation to desired bending angle... Forming characteristics of thin-walled tube bending process with small bending radius LI Heng(李 恒) , YANG He(杨 合), ZHAN Mei(詹 梅), GU Rui-Jie(谷瑞杰) Department of Materials Forming......
Article ID: 1003-6326(2005)02-0221-04 Preparation of textile preform with sewing machines and bending properties of stitched woven glass fibre fabrics ZHAO Nuo-ping, , C.Herzberg (Institute... are generally used in the clothing industry, are also suitable for the processing of the reinforced fabrics. This study aims also to the changes of property arising from the sewing process. Bending......
J. Cent. South Univ. (2019) 26: 196-206 DOI: https://doi.org/10.1007/s11771-019-3993-y Bending performance of TRC-strengthened RC beams with secondary load under chloride erosion YU Yu-lin(余玉琳)1... and corrosion resistance and it is suitable for repairing and reinforcing concrete structures in harsh marine environments. The four-point bending method was used to analyze the influence of the salt......
Performance Degradation of the Repeated Recycled Aggregate Concrete with 70% Replacement of Three-generation Recycled Coarse Aggregate朱平华1,ZHANG Xinxin1,伍君勇1,2,王新杰11. Department of Civil Engineering... by following the repeated mode of ‘concrete-waste concrete-coarse aggregate-concrete’. Moreover, the focus was on ‘three generations’ of repeated RCAs, the RCA was produced by crushing......
......