共搜索到12067条信息,每页显示10条信息,共1207页。用时:0小时0分0秒343毫秒
Study of TiC+TiN Multiple Films On Type of 316L Stainless Steel DENG Bai-quan1,HU Dong-ping2,HUANG Ben-sheng3,JIN Yong4,Xue Qi3 (1.Southwest Academy of Physics, Chengdu 610041;2.China Academy..., the change of growth rate of the film on the 316L Stainless steel is not same as the one on carbides substrates, while the mole ratio of CH4 to TiCl4 (mCH4/TiCl4) is changed from 1.2to 2.0. The Ti [C, N......
Key Technique of Austenitic Stainless Steel on-line Solution Treatment LIU Shuang1,ZHAO Fei2,LI Ying2,LI Wei-juan1,LI Sheng-li1 (1.Anshan University of Science and Technology, Anshan, 114044;2.Dalian Jinniu Co. Ltd. , Dalian, 113000, P. R. China) 摘要:Generally the methods of solution treatment of austenitic stainless steel are bifurcated on-line solution and off-line solution . For a founded......
......
J. Cent. South Univ. Technol. (2008) 15: 209-213 DOI: 10.1007/s11771-008-0040-9 Preparation of precursor for stainless steel foam ZHOU Xiang-yang(周向阳)1, LI Shan-ni(李善妮)2, LI Jie(李 劼)1, LIU Ye...; Abstract: The effects of polyurethane sponge pretreatment and slurry compositions on the slurry loading in precursor were discussed, and the performances of stainless steel foams prepared from precursors......
......
The Study of Plasma Nitriding of AISI304 Stainless Steel WANG Liang1,JI Shi-jun1,GAO Yu-zhou1,SUN Jun-cai1 (1.Institute of Metal and Technology, Dalian Maritime University) 摘要:This paper presents results on the plasma nitriding of AISI 304 stainless steel at different temperatures in NH 3 gas. The working pressure was 100~200 Pa and the discharge voltage was 700~800V. The phase of nitrided......
Trans. Nonferrous Met. Soc. China 22(2012) s639-s644 Microstructures of brazing zone between titanium alloy and stainless steel using various filler metals Taeshin CHUNG1, Jungsoo KIM2, Jeongseok..., Korea Received 21 May 2012; accepted 6 November 2012 Abstract: Titanium alloy (Ti-Al-V alloy) substrate was brazed with stainless steel (STS304) using filler metal. At an optimized brazing condition......
The Effect of NiAl Coatings on Oxidation Behavior of AISI 403 Stainless Steel M. Ebrahimian1,F.Ashrafizadeh2 (1.Iranian Surface Research & Engineering Centre, Isfahan Science & Technology Town, Isfahan, Iran;2.Department of Materials Engineering, Isfahan University of Technology, Isfahan, Iran) 摘要:This paper reports the oxidation behavior of stainless steel type 403 as a substrate material......
MICROSTRUCTURE AND TENSILE PROPERTY OF AN AS-CAST DUPLEX STAINLESS STEEL G.Y.Su1,K.Yang1,P.L.Mao1 (1.Institute of Metal Research,The Chinese Academy of Sciences,Shengyang 110016,China;2.School... 0Cr17Mn14Mo2N duplex stainless steel was investigated.Itwas found that the morphology ofδ-ferrite in the dual phases microstructures changedgradually from dendritic to lamellar and then to spheroidal,and its......
Article ID: 1003-6326(2005)05-1077-04 Impact toughness of tungsten films deposited on martensite stainless steel HUANG Ning-kang(黄宁康), YANG Bin(杨 斌), WANG De-zhi(汪德志) (Key Laboratory... toughness of stainless steel. Key words: W film; stainless steel; Charpy impact test CLC number: TH140.7; O484.5; TF125.2 Document code: A <上一页 1 2 3 4 5 6 7 8 9 10 ... 1207 下一页 >