共搜索到22160条信息,每页显示10条信息,共2216页。用时:0小时0分0秒374毫秒
......
D-21502, Germany) Abstract: The interface evolution of TiAl/Ti6242 joint produced by transient liquid phase(TLP) bonding with Ti, Cu foils as insert metals was investigated. The results show... pressure, bonding temperature, holding time and stacking sequence of the insert foils on the joint formation process were proposed. Key words: TiAl; Ti6242 transient liquid phase bonding......
......
Transient Liquid Phase Bonding of IN738LC/MBF-15/IN738LC:Solidification Behavior and Mechanical PropertiesB.Binesh,A.Jazayeri Gharehbagh摘 要:Transient liquid phase(TLP) bonding of IN738 LC superalloy was carried out using a rapidly solidified MBF-15 Ni-based foil. The effects of bonding temperature(1130–1170 °C) and time(5–120 min) as well as foil......
......
Effects of Silicon Nanoparticles on the Transient Liquid Phase Bonding of 304 Stainless SteelH.M.Hdz-García1,A.I.Martinez2,R.Mu?oz-Arroyo1,J.L.Acevedo-Dávila1,F.García-Vázquez1,F.A.Reyes-Valdes1摘 要:Transient liquid phase(TLP) bonding of 304 stainless steel with nickel based filler metal, BNi-9, was performed to study the influence of silicon......
Ultrasound-Assisted Transient Liquid Phase Bonding of Magnesium Alloy Using Brass Interlayer in AirZhiwei Lai1,2,3,4,Ruishan Xie2,5,Chuan Pan3,Xiaoguang Chen2,Lei Liu2,Wenxian Wang5,Guisheng Zou21... id="ChDivSummary" name="ChDivSummary">The microstructure evolution and oxide film behavior in ultrasound-assisted transient liquid phase(U-TLP) bonding of Mg alloy were investigated by applying......
tensile-shear strength is greater than on room temperature tensile-shear strength. Key words: Ni-based alloy; transient liquid phase bonding; microstructure; tensile-shear strength 1 Introduction... to their high susceptibility to hot cracking during welding and post-weld heat treatment cracking [7,8]. Therefore, transient liquid phase (TLP) bonding technique, which can be used to produce joints......
J. Cent. South Univ. (2018) 25: 1025-1032 DOI: https://doi.org/10.1007/s11771-018-3802-z Partial transient-liquid-phase bonding of TiC cermet to stainless steel using impulse pressuring with Ti/Cu... 2018 Abstract: Partial transient liquid phase (PTLP) bonding of TiC cermet to 06Cr19Ni10 stainless steel was carried out. Impulse pressuring was used to reduce the bonding time, and a Ti/Cu/Nb......
......