共搜索到18670条信息,每页显示10条信息,共1867页。用时:0小时0分0秒312毫秒
Effect of erbium on microstructure and thermal compressing flow behavior of Mg-6Zn-0.5Zr alloy WANG Zhong-jun(王忠军)1, 2, ZHANG Cai-bei(张彩碚)1, SHAO Xiao-hong(邵晓宏)1, CUI Jian-zhong(崔建忠)2, LE Qi-chi.... The results show that Mg-6Zn-0.5Zr alloy mainly consists of α-Mg and MgZn2 phase, while Mg-6Zn-0.5Zr-1Er alloy comprises α-Mg phase, coarse Mg3Zn4Er2 eutectic, rod-liked Mg3Zn4Er2 precipitated phase, fine I......
The Strengthening of Cu-15Ni-8Sn Alloy WANG Ming-Pu1,WANG Yan-hui1,HONG Bin1 (1.School of Material Science and Engineering, Central South University, Changsha China) 摘要:The microstructure, property and relation between them of Cu-15Ni-8Sn alloy are studied by means of TEM and the measurement of hardness. The results show that γ '' metastable phase strengthens alloy because of its ordering......
The Technological Improvements of Aluminum Alloy Coloring by Electrolysis LI Nai-jun1 (1.Teachers College, Shenyang University, Shenyang 110015, P. R. China) 摘要:The technological process of coloring golden-tawny on aluminum alloy by electrolysis was improved in this paper. The optimum composition of electrolyte was found, the conditions of deposition and anodic oxidation by electrolysis were......
Microstructure and Performances of Nanocrystalline Zinc-nickel Alloy Coatings LI Guang-yu1,NIU Li-yuan1,JIANG Zhong-hao1,LIAN Jian-she1 (1.The Key Lab of Automobile Materials, Ministry of Education, China, College of Materials Science and Engineering, Jilin University, Nanling Campus, Changchun, 130025, China) 摘要:Nanocrystalline zinc-nickel alloy coatings were deposited from an alkaline......
Alloy 20不锈钢薄板等离子弧焊接工艺研究赵斌,王宾宾,王小华中国船舶重工集团公司第七二五研究所摘 要:对Alloy 20不锈钢薄板进行了等离子弧焊接工艺试验研究.结果表明,采用等离子弧焊接方法,ERCr Ni Mo-3焊材及合理的焊接工艺参数,等离子弧焊接工艺可用于Alloy 20不锈钢薄板的焊接,焊接接头各项性能均能满足要求.关键词:Alloy 20;不锈钢薄板;等离子弧焊接;......
)Abstract:Stainless die with micro-groove and micro-hole have been designed and manufactured, which has been used to study superplastic microforming of 2091Al-Li alloy by means of superplastic forming... micro-rib specimen, behavior of material could be understood well.Key words:superplasticity; microforming; extrusion; 2091Al-Li alloy......
composition of 6061aluminum alloy (mass fraction, %) 机器人搅拌摩擦焊设备采用KR500_R2830_ MT型号的库卡机器人配套专用电主轴,如图2所示.该设备包含了库卡机器人,六维力传感器,高速电主轴,搅拌头以及工装台等.其中六维力传感器采用的是宇立仪器(Sunrise Instruments)品牌,基面通过转接件与库卡机器人的末端法兰盘连接,工作面... Astronautica, 2014, 93(1): 366-373. [2] 李红. 城轨铝合金车体侧墙搅拌摩擦焊技术研究[D]. 哈尔滨工业大学, 2014. LI Hong. Research on friction stir welding technology for side walls of urban rail aluminum alloy carbody[D]. Harbin......
Trans. Nonferrous Met. Soc. China 22(2012) s656-s660 Microforming of superplastic 5083 aluminum alloy Md. Abu Mowazzem HOSSAIN1, Sung-Tae HONG1, Kyu-Yeol PARK1, Young-Sang NA2 1. School of Mechanical...: The mechanical behavior of superplastic 5083 aluminum alloy during microforming process was investigated by finite element analysis. A micro V-groove die was modeled to analyze the effects of forming......
Study on Thermomagnetic Treatment Fe-25.5Cr-12Co Permanent Magnetic Alloy Zhen Liang1,GAO Run-sheng2,ZHU Dan-yang1,SUN Xue-yin1,SHAO Wen-zhu1,XU Ren-gen1 (1.Technology and Development Centre... Fe-25.5Cr-12Co alloy by different process of thermomagnetic treatment were investigated. It is found that magnetic properties are sensitive to parameters of thermomagnetic treatment process in magnetic......
J. Cent. South Univ. (2018) 25: 1573-1581 DOI: https://doi.org/10.1007/s11771-018-3849-x Derivation and application of concentration formula of alloy genes of DO3-type in BCC alloy systems PENG... and Engineering, Central South University, Changsha 410083, China Central South University Press and Springer-Verlag GmbH Germany, part of Springer Nature 2018 Abstract: Taking Ta–W alloy system......