共搜索到18621条信息,每页显示10条信息,共1863页。用时:0小时0分0秒281毫秒
......
Ni-Fe-X基合金抗氧化性能的研究周涛,李宇春,李志友,刘咏,周科朝摘 要:用热压法制备了3种成分的Ni-Fe-X基合金,并在1 000℃和1 200℃进行了大气氧化试验.XRD,SEM,EDX和金相分析表明,Ni-11Fe-10Cu-6Al-3Sn(其中数据为质量分数)的氧化层最致密,主要由深色,浅色2种不同形貌和成分的混合氧化物组成,合金中的Cu具有较强的抗氧化性能,氧化铝的存在有效改善了氧化物结构.Fe-Ni合金氧化膜疏松,抗热震性弱,氧化膜与基体间有明显的裂纹,氧化膜主要是铁氧化物.关键词:Ni-Fe-X基合金;EDX面扫描;抗氧化性;......
Ni-Fe-X合金的制备与显微组织的研究周涛,周科朝,李宇春,李志友,刘咏摘 要:采用氢气,氩气和气氛保护热压3种烧结工艺制备了3种不同成分的Ni基合金,密度测试,金相以及XDR,SEM和EDX分析结果表明:在氢气和氩气气氛下烧结时,Ni-Fe-Cu-Al-Sn/Zn样品出现体积膨胀,密度下降和孔隙率增加现象,通过气氛保护热压制备的样品致密度高且孔隙率低;Ni-Fe样品形成(Fe·Ni)固溶体;而NiFeCuAlX(X为Zn或Sn)样品基体主要由细小的NiAl和较粗大的Ni和(Fe·Ni)组成,其他元素均固溶于其中.关键词:Ni-Fe-X合金;热压;烧结;......
The Strengthening of Cu-15Ni-8Sn Alloy WANG Ming-Pu1,WANG Yan-hui1,HONG Bin1 (1.School of Material Science and Engineering, Central South University, Changsha China) 摘要:The microstructure, property and relation between them of Cu-15Ni-8Sn alloy are studied by means of TEM and the measurement of hardness. The results show that γ '' metastable phase strengthens alloy because of its ordering......
The Technological Improvements of Aluminum Alloy Coloring by Electrolysis LI Nai-jun1 (1.Teachers College, Shenyang University, Shenyang 110015, P. R. China) 摘要:The technological process of coloring golden-tawny on aluminum alloy by electrolysis was improved in this paper. The optimum composition of electrolyte was found, the conditions of deposition and anodic oxidation by electrolysis were......
Microstructure and Performances of Nanocrystalline Zinc-nickel Alloy Coatings LI Guang-yu1,NIU Li-yuan1,JIANG Zhong-hao1,LIAN Jian-she1 (1.The Key Lab of Automobile Materials, Ministry of Education, China, College of Materials Science and Engineering, Jilin University, Nanling Campus, Changchun, 130025, China) 摘要:Nanocrystalline zinc-nickel alloy coatings were deposited from an alkaline......
Alloy 20不锈钢薄板等离子弧焊接工艺研究赵斌,王宾宾,王小华中国船舶重工集团公司第七二五研究所摘 要:对Alloy 20不锈钢薄板进行了等离子弧焊接工艺试验研究.结果表明,采用等离子弧焊接方法,ERCr Ni Mo-3焊材及合理的焊接工艺参数,等离子弧焊接工艺可用于Alloy 20不锈钢薄板的焊接,焊接接头各项性能均能满足要求.关键词:Alloy 20;不锈钢薄板;等离子弧焊接;......
)Abstract:Stainless die with micro-groove and micro-hole have been designed and manufactured, which has been used to study superplastic microforming of 2091Al-Li alloy by means of superplastic forming... micro-rib specimen, behavior of material could be understood well.Key words:superplasticity; microforming; extrusion; 2091Al-Li alloy......
Trans. Nonferrous Met. Soc. China 22(2012) s656-s660 Microforming of superplastic 5083 aluminum alloy Md. Abu Mowazzem HOSSAIN1, Sung-Tae HONG1, Kyu-Yeol PARK1, Young-Sang NA2 1. School of Mechanical...: The mechanical behavior of superplastic 5083 aluminum alloy during microforming process was investigated by finite element analysis. A micro V-groove die was modeled to analyze the effects of forming......
Study on Thermomagnetic Treatment Fe-25.5Cr-12Co Permanent Magnetic Alloy Zhen Liang1,GAO Run-sheng2,ZHU Dan-yang1,SUN Xue-yin1,SHAO Wen-zhu1,XU Ren-gen1 (1.Technology and Development Centre... Fe-25.5Cr-12Co alloy by different process of thermomagnetic treatment were investigated. It is found that magnetic properties are sensitive to parameters of thermomagnetic treatment process in magnetic......