共搜索到6698条信息，每页显示10条信息，共670页。用时：0小时0分0秒749毫秒
Fabrication of LSGM thin films on porous anode supports by slurry spin coating for IT-SOFCHong-Yan Sun1,Wei Sen2,Wen-Hui Ma3,Jie Yu3,Jian-Jun Yang31. College of Science, Honghe University2. Yunnan... synthesized by glycine-nitrate process, and LSGM electrolyte thin film was successfully fabricated on porous anode substrate of LSCM by slurry spin coating technology. Some technical parameters......
Spin Coating Epitaxial Films常晶晶State Key Discipline Laboratory of Wide Band Gap Semiconductor Technology,Shaanxi Joint Key Laboratory of Graphene,School of Microelectronics,Xidian UniversityAdvanced Interdisciplinary Research Center for Flexible Electronics,Xidian University摘 要:<正>Epitaxy is usually used to produce high quality crystals......
Preparation and characterization of La0.8Sr0.04Ca0.16Co0.6Fe0.4O3-δ-La0.9Sr0.1Ga0.8Mg0.2O3 composite cathode thin film for SOFC by slurry spin coating孙红燕1,2,马文会1,2,于洁1,2,陈秀华3,林航昇1,21. National... and conventional solid-state reaction method, respectively. The LSCCoF-LSGM composite cathode material was successfully elaborated and deposited on dense pellets of the LSGM electrolyte by means of slurry spin......
Preparation and characterization of La0.8Sr0.04Ca0.16Co0.6Fe0.4O3-δ-La0.9Sr0.1Ga0.8Mg0.2O3 composite cathode thin film for SOFC by slurry spin coating孙红燕1,2,马文会1,2,于洁1,2,陈秀华3,林航昇1,21. National... and conventional solid-state reaction method, respectively. The LSCCoF-LSGM composite cathode material was successfully elaborated and deposited on dense pellets of the LSGM electrolyte by means of slurry spin......
Synthesis and Characterization of Indium Niobium Oxide Thin Films via Sol-Gel Spin Coating MethodSaeed Mohammadi1,Mohammad Reza Golobostanfard1,Hossein Abdizadeh1,21. School of Metallurgy... study,niobium-doped indium oxide thin films were prepared by solegel spin coating technique.The effects of different Nb-doping contents on structural,morphological,optical,and electrical properties......
by pack cementation and slurry-sintering method. The ablation resistance of the SiC/ZrC-ZrB2 coating was tested under plasma flame above 2300 °C. The results indicate that the SiC/ZrC-ZrB2 double layer... flame. Key words: ablation; pack cementation; slurry; SiC/ZrC-ZrB2 coating Cite this article as: LIU Han-zhou, YANG Xin, FANG Cun-qian, SHI An-hong, CHEN Lei, HUANG Qi-zhong. Ablation resistance......
characterized into high and low densities. The coatings were applied by a two-step approach: pack cementation and silica sol based slurry coating processes. The relationship between the microstructure... words:mullite; carbon-carbon composite; slurry coating; isothermal oxidation......
, Central South University, Changsha 410083, China) Abstract: The high-temperature oxidation-resistant MoSi2 coating on the Nb substrate was prepared by slurry firing. The structure, compositions and phase... of slurry firing to prepare the high-temperature MoSi2 coating on Nb is feasible. The SiO2 scale, which is formed on the surface of the coating by the self-oxidation of MoSi2, prevents the further......
coating thickness on casting imperfection and porosity percentage as well as eutectic silicon spacing of the alloy. The results showed that increasing slurry viscosity and flask dipping time influenced... porosity. Key words: aluminum alloy; lost foam casting; coating thickness; slurry viscosity; dipping time; porosity 1 Introduction Lost foam casting (LFC) as a cost-effective and environmentally......
results were discussed through current theoretical ideas. Key words: TiO2 films; optical properties; nanostructure; electron microscopy; thin films; spin coating technique 1 Introduction Many theoretical... diameter. The absorption edge and the refractive index of nano TiO2 films were determined by reflectance and transmittance spectra performed on the films deposited on quartz substrates by spin coating......
