共搜索到15954条信息,每页显示10条信息,共1596页。用时:0小时0分0秒599毫秒
Trans. Nonferrous Met. Soc. China 28(2018) 385-392 Influence of T6 heat treatment on A356 and A380 aluminium alloys manufactured by thixoforging combined with low superheat casting Ridvan GECU... Received 26 January 2017; accepted 17 May 2017 Abstract: The effects of T6 heat treatment on thixoforged A356 and A380 aluminium alloys were studied. Low superheat casting (LSC) technique was carried out......
-sized B4C and Mg2Si. The stress distributions of as-rolled and heated composites were similar, considering that the T6 heat treatment was only effective in eliminating the first internal stress...; T6 heat treatment Cite this article as: LIU Rui-feng, WANG Wen-xian, CHEN Hong-sheng. Synthesis of nano- to micrometer-sized B4C particle-reinforced aluminum matrix composites via powder metallurgy......
; tungsten inert gas arc welding; T6 heat treatment... of heat treatment on microstructure and mechanical properties on TIG welded ZM6 magnesium alloyZHANG Tie-lei1, JI Ze-sheng1, ZHAO Zhen-hua2(1. School of Material Science and Engineering, Harbin University......
Trans. Nonferrous Met. Soc. China 31(2021) 2208-2219 Influence of Mg addition and T6 heat treatment on microstructure, mechanical and tribological properties of Al-12Si-3Cu based alloy M. BEDER1, Y... 2020; accepted 22 May 2021 Abstract: The aim of the present study was to investigate the influence of Mg addition and T6 heat treatment on microstructure, mechanical and tribological properties......
of the thixoformed samples were subjected to the T6 heat treatment. The samples were then examined by optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive X-ray (EDX) spectroscopy... a mixed mode fracture behaviour, where dimple and cleavage ruptures were seen on the fracture surface of the samples. Key words: aluminium alloy; thixoforming; T6 heat treatment; mechanical......
of Technology, Lanzhou 730050, China) Abstract: The microstructure and mechanical properties of ZA72 magnesium alloy after T6 heat treatment with different solution times were investigated using... with the solution time extending. The mechanical properties of alloy are obviously improved after T6 heat treatment, the tensile strength and micro-hardness show the trend of arising first and descending later......
of the samples were treated with the T6 heat treatment. The samples were then examined by optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive X-ray (EDX) spectroscopy and X...-Mg alloy; Cu content; thixoforming; T6 heat treatment; mechanical properties 1 Introduction Thixoforming is a type of semisolid metal (SSM) processing for forming alloys in the semisolid state to near......
Trans. Nonferrous Met. Soc. China 22(2012) 1041-1050 Effects of T6 heat treatment on mechanical, abrasive and erosive-corrosive wear properties of eutectic Al-Si alloy A. K. GUPTA1, B. K. PRASAD1, R... by controlling the T6 heat treatment parameter, and their influence on hardness, strength and elongation, and response of the samples in erosion-corrosion and abrasion conditions were studied. Characteristics......
%), respectively. Influence of rare earths (RE) on microstructureand strength in both T4 (solute heat treatment) and T6 (solute heat treatment andartificial ageing treatment) were investigated...HEAT TREATMENT STRENGTHENING EFFECTS OF RARE EARTHS ON Mg-9Al ALLOY Y.S.Wang1,W.J.Ding2,Q.D.Wang2,J.Z.Yu1 (1.Shanghai Cosmopolitan Automobile Accessory Co. LTD, Shanghai 200083, China;2.School......
the solution heat treatment process. Key words: high pressure die casting (HPDC); aluminum alloys; as-cast condition; T6 treatment; incipient melting 1 Introduction Near-net shape casting of components... specimens were machined from the plates according to ASTM standards[39] and the tensile properties were evaluated (Instron Model 1342). Table 3 T6 heat treatment parameters for rheocast wrought alloys......