共搜索到19602条信息,每页显示10条信息,共1961页。用时:0小时0分0秒354毫秒
) 摘要:The influence of nano-Al2O3 additive on the adhesion between epoxy resin and steel substrate has been investigated. The results of tensile testing indicated that the adhesion strength was increased dramatically by addition of Al2O3 nanoparticles in epoxy resin compared with that of the unmodified resin. The highest adhesion strength was obtained with 1 wt% nano-Al2O3 added in epoxy adhesive......
), Ni[011]//Fe[010], and Similar results were obtained for Cu/Fe(100) interfaces. This structure was supported by TEM analysis of plated Ni layer on Fe(100) surfaces. The adhesion strength of the Ni/Fe... of the calculation. These results indicate that the first principles calculation, which deals with the ideal interface at the atomic scale, has the potential to evaluate the adhesion strength of metallic......
......
by the change of oxide film in state. The adhesive strengths of both A2017P and A5052P are poor. Table 3 Adhesion strength for Ni-P coatings after 90? peeling test The adhesive strength of each... Effects of zincate treatment on adhesion of electroless Ni-P coating onto various aluminum alloys Makoto HINO1, Koji MURAKAMI1, Yutaka MITOOKA1, Ken MURAOKA1, Teruto KANADANI2 1. Industrial......
63875) 摘要:Shaft-loaded blister test technique is used as an effective quantitative tool to measure adhesion strength. Investigation on conductive adhesive was done by modified blister test... to the conventional adhesion measurement techniques. In our study, epoxy matrix adhesive was studied using blister test technique in comparison with the traditional test-lap shear test. Adhesion strength......
) experiments are used to characterize every surface modification step of the developed process. A cross-hatch tape test was used to asses the adhesion strength of the electroless films that is shown...NH3 Plasma Surface Treatments of Engineering Fluoropolymers:A Way toEnhance Adhesion of Ni or Cu Thin Films Deposited by Electroless Plating Yves Goepfert1,Marlène Charbonnier1,Maurice Romand1......
in different levels of ionic strength and pH values were measured by Coulter Delsa 440SX zeta potential determinator. Meanwhile, the effects of bacterial adhesion and bacterial concentration on zeta potential... of pyrite and A.f cultured by sulfur in different levels of ionic strength and pH values were measured in order to contrastively discover the alternation of surface property modified by bacterial adhesion......
Improvement of anticorrosion and adhesion to magnesium alloy by phosphate coating formed at room temperature NIU Li-yuan(牛丽媛), LIN Ji-xing(林继兴), LI Yong(李 勇), SHI Zi-mu(史子木), XU Lin-chao(徐临超... coatings formed in bath containing earth additives at room temperature have dense and fine microstructure. The phosphate coating provides excellent paint adhesion to the magnesium alloy. Salt spray......
......
......