共搜索到21295条信息，每页显示10条信息，共2130页。用时：0小时0分0秒406毫秒
Preparation and Corrosion Resistance of Rare Earth Ceramic Film on AZ91 Magnesium Alloy Guo Yuandong1,Li Yingjie1,Xu Yue1 (1.School of Materials Science and Engineering, Beijing University... ceramic film on AZ91 magnesium alloy was prepared by dip coating process, and technical parameters of preparation were defmed. Microstructure and composition of the film were studied and corrosion......
......
shape, line width and film morphology printed on substrate are affected by the rheological behaviour[15] and drying behaviour[16] of ceramic inks. In the present work, two kinds of BaTiO3 ceramic inks... Barium titanate ceramic inks for continuous ink-jet printing synthesized by mechanical mixing and sol-gel methods ZHOU Zhen-jun(周振君)1, YANG Zheng-fang(杨正方)2, YUAN Qi-ming(袁启明)2 1. College......
Preparation of TiO2 film on granulated ceramic and application of disposal in waterJU Chunhua1),and WANG Fuping2)1) Department of Architect Material,School of Materials Science and Engineering,Harbin... granulated substance carrier material was used to prepare the TiO2 thin film to carry on the water treatment to obtain the good effect.The gangue of coal was used to make the ceramic granulated substance......
Superplastic forming of Ti6Al4V alloy using ZrO2-TiO2 ceramic die with adjustable linear thermal expansion coefficient JIANG Shao-song(蒋少松), ZHANG Kai-feng(张凯峰) National Key Laboratory...) and the volume fraction of TiO2 was investigated, and also the influence of relative density of ceramic on the CTE was studied. The results show that the volume fraction of TiO2 and the relative density......
that protects the composites at the initial immersion stage. However, this film is discontinuous due to the presence of SiC foam ceramic, and thus the interfaces become the weakest parts in the SFCAMCs...J. Cent. South Univ. (2017) 24: 1934-1940 DOI: https://doi.org/10.1007/s11771-017-3601-y Corrosion behavior of SiC foam ceramic reinforced Al-23Si composites in NaCl solution ZHU Jian-bin(诸建彬)1, 2......
Study on Physical and Chemical Behaviors of Rare Earths in Preparing Ceramic Tube Supported Palladium Film by Electroless Plating蒋柏泉,叶志强,彭健摘 要:<正>The rare earths of ytterbium, lanthanum, praseodymium, neodymium and their binary mixtures were respectively added into the traditional electroless plating solution to prepare thin palladium film......
Structure and properties of ceramic coatings formed on aluminum alloys by microarc oxidation LIU Wan-hui(刘万辉), BAO Ai-lian(鲍爱莲), LIU Rong-xiang(刘荣祥), WU Wan-liang(武万良) College of Materials Science and Engineering, Heilongjiang Institute of Science and Technology, Harbin 150027, China Received 28 July 2006; accepted 15 September 2006 Abstract: The thick and hard ceramic coatings were......
Study on Physical and Chemical Behaviors of Rare Earths in Preparing Ceramic Tube Supported Palladium Film by Electroless Plating Peng Jian1,Jiang Boquan1,Ye Zhiqiang1 (1.School of Environmental... into the traditional electroless plating solution to prepare thin palladium film on the inner surface of porous ceramic tube. The experimental results shows that the addition of rare earths increases......
Application of Ceramic Film as Means of Lubrication for Forming of TiSheet in a Highly Localized Deformation ProcessGHULAM Hussain1,ASIF Iqbal21. Department of Mechanical Engineering, Eastern... forming is a novel die-less sheet forming process. There is a need for special means to retain lubricant at the tool/sheet interface during forming. To fulfill the stated aim, a porous ceramic film......
