共搜索到69412条信息,每页显示10条信息,共6942页。用时:0小时0分0秒500毫秒
Effect of pouring temperature on semi-solid slurry of A356 Al alloy prepared by weak electromagnetic stirring LIU Zheng(刘 政) 1, 2, MAO Wei-min(毛卫民)1, ZHAO Zheng-duo(赵振铎)1 1...; Abstract: The semi-solid slurry of A356 Al alloy was manufactured by low superheat pouring and weak electromagnetic stirring. The effects of pouring temperature on the slurry......
, A441: 49-59. [5] LIU Zheng, MAO Wei-min, ZHAO Zheng-duo. Effect of pouring temperature on semi-solid slurry of A356 Al alloy prepared by weak electromagnetic stirring [J]. Trans Nonferrous Met Soc... Microstructure evolution of semi-solid 2024 alloy during two-step reheating process WANG Shun-cheng(王顺成), LI Yuan-yuan(李元元), CHEN Wei-ping(陈维平), ZHENG Xiao-ping(郑小平) School of Mechanical......
gravity cast Al-Cu alloy [J]. Solid State Phenomena, 2006, 116/117: 76-79. [11] WANNASIN J, MARTINEZ R A, FLEMINGS M C. A Novel technique to produce metal slurries for semi-solid metal processing[J... of an aluminum alloy using the GISS process is a feasible process. Key words: gravity sand casting; semi-solid sand cast; Al7Si0.3MgFe; gas induced semi-solid 1 Introduction The semi-solid metal forming......
of semi-solid A356 alloy and concluded that more homogeneous structure and macroseparation can be observed with greater compression velocity. CHINO et al[4] studied the deformation behavior of AZ91... at OLYMPUS PMG3 and linked with metallographic analysis software of SISC IAS V8.0. 3 Results and discussion 3.1 Microstructure during semi-solid extrusion of Al- 4Cu-Mg alloy Fig.2 shows the extruded......
. 263-268. [5]LI Yuan-dong, HAO Yuan, CHEN Ti-jun, et al. Effects of isothermal heat treatment on microstructure evolution and formability of AZ91D magnesium alloy in semi-solid state [J]. The Chinese...]. Trans Nonferrous Met Soc China, 2001, 11(4): 546-550. [7]LUO Shou-jing,JIANG Ju-fu,DU Zhi-ming, et al. New probe on semi-solid processing for alloy[J]. Special Casting and Nonferrous Alloys, 2003......
-solid process; Al alloy 1 Introduction Semi-solid die cast process with various features [1-6] is a forming technology developed on the base of general molten metal die cast, and has gradually become... and improving the quality of products. 2 Method An induction device of medium frequency with circled multi-position heated the billets of Al alloy (A356) to semi-solid state, and then die-castings......
Feasibility of semi-solid die casting of ADC12 aluminum alloy S. JANUDOM1, T. RATTANOCHAIKUL1, R. BURAPA2, S. WISUTMETHANGOON3, J. WANNASIN1 1. Department of Mining and Materials Engineering... June 2010 Abstract: The feasibility of semi-solid die casting of ADC12 aluminum alloy was studied. The effects of plunger speed, gate thickness, and solid fraction of the slurry on the defects were......
, et al. Effect of microstructure on tensile behavior of thixoformed 357-T6 semisolid Al alloy [J]. Metalll Mater Trans A, 2004, 35A: 1407-1410. [5]Jung H K. The induction heating process of semi-solid.... Reheating of semi-solid ZL101 alloy [J]. The Chinese Journal of Nonferrous Metals, 2003, 13(3): 626-630.(in Chinese) [8]DONG Jie, CUI Jian-zhong, LE Qi-chi, et al. Liquidus semi-continuous casting......
?540. [10] JI Ze-Sheng, YAN Hong-Hua, ZHENG Xiao-Ping, SUGIYAMA S O, YANAGIMOTO J. Numerical and experimental investigations of semi-solid AZ91D magnesium alloy in thixoforming process [J..., temperature and strain rate of thixoforging process of 6061 Al alloy, isothermal experiments were performed at 590 ?C for different holding times on 200 t hydraulic pressure machine. The hydraulic system......
by ECAE. Furthermore, thixoforming of semi-solid billets of magnesium alloy prepared by new SIMA was investigated. 2 Experimental A typically commercial cast Mg-Al-Zn alloy, AZ91D, was used... Preparation of semi-solid billet of magnesium alloy and its thixoforming JIANG Ju-fu(姜巨福), LUO Shou-jing(罗守靖) School of Materials Science and Engineering, Harbin Institute of Technology, Harbin......