共搜索到18834条信息,每页显示10条信息,共1884页。用时:0小时0分0秒781毫秒
of recrystallization in 2091 Al-Li alloy Abstract: The effect of current pulse on the dynamics of recrystallization in 2091 Al Li alloy has been investigated. Metallographic...">Keyword: current pulse; dislocation structure; recrystallization; Al Li alloy; Received: 1999-12-30 众所周知 [1,2,3,4,5] , 脉冲电流能促进原子扩散, 并且大量的研究正利用这......
Computer simulation of interface evolution for an Al-Li alloy during early aging stageTANG Liying, WANG Yongxin, CHEN Zheng, LU Yanli, and ZHANG Jianjun Department of Materials Science.... For the Al-10%Li (atom fraction) alloy aged at 192°C, the assumptions of the classical nucleation theory disagreed with the facts. The phase transformation followed the non-classical nucleation mechanism......
On the double-side probeless friction stir spot welding of AA2198 Al-Li alloyQ.Chu1,W.Y.Li1,H.L.Hou2,X.W.Yang1,A.Vairis1,3,C.Wang2,W.B.Wang21. State Key Laboratory of Solidification Processing... of Crete摘 要:Double-side probeless friction stir spot welding(DP-FSSW) of AA2198 alloy was conducted to investigate the microstructure and mechanical......
Al-Li合金强韧化机理及途径 杨伏良1,甘卫平1,周兆锋1 (1.中南大学材料科学与工程学院,长沙,410083) 摘要:概述了Al-Li合金强韧化的内部机理和外部机理,并在此基础上阐述了提高Al-Li合金强韧性的主要途径. 关键词:Al-Li合金; 强韧性; 途径; [全文内容正在添加中] ......
, Kreissig U, Wieser E, Habazaki H, Shimizu K. Mobility of lithium ions in anodic alumina formed on an Al-Li alloy[J]. Corrosion Science, 2000, 42(6): 1083-1091. [13] Lou A, Lloyd D J, Gupta A, Youdelis W V. Precipitation and dissolution kinetics in Al-Li-Cu-Mg alloy 8090[J]. Acta Metallurgica et Materialia, 1993, 41(3): 769-776. [14] Skeldon P, Zhou X, Thompson G E. Adhesion of anodic films......
......
快速凝固Al-Li系合金的塑韧性潘青林,尹志民,张新明摘 要:快速凝固Al-Li系合金的塑韧性问题是困扰其发展的关键问题.本文结合作者近几年来的研究工作,综合论述了快速凝固Al-Li系合金的组织特征,塑韧性问题及其机理.提出了改善快速凝固AL-Li系合金塑韧性的途径.关键词:Al-Li系合金;快速凝固;塑性;韧性;......
Al-Li合金阳极氧化膜的制备与性能沈光霁1,王吉会2,孙一31. 沈阳龙昌管道检测中心2. 天津大学材料科学与工程学院3. 沈阳工学院经济与管理学院摘 要:Al-Li合金在潮湿和盐雾环境中易发生晶间腐蚀,剥落腐蚀和应力腐蚀等形式的破坏.为了提高Al-Li合金的耐蚀性,采用阳极氧化的方法,在15%硫酸溶液中在Al-Li合金表面制备了一层Al2O3阳极氧化膜,通过测厚仪及显微硬度计测试了膜层厚度及硬度,通过扫描电镜,电化学测试和腐蚀试验等方法,研究了电流密度,氧化时间等对阳极氧化膜耐蚀性的影响.结果显示:所得氧化膜表面呈多孔状结构,厚度在313μm之间,硬度在80200 HV之间;当电流密度为2.0 A/dm2,氧化时间为60 min,沸水封孔处理20 min时制备的阳极氧化膜耐蚀性最优.
Al-Li合金断裂韧性的研究郑子樵,郑庆,尹登峰,谭澄宇,周东海,蒋呐,向曙光,王玉秀摘 要:研究了时效工艺对一种高强高模Al-Li合金断裂韧性的影响.研究结果表明,时效前的预时效或预变形可促进T1相析出,从而改善合金的断裂韧性,但在过时效状态,预时效或预变形的有利影响减弱.为获得高的断裂韧性.时效时应避免粗大晶界平衡相的析出和晶界无析出带变宽.依据组织观察结果,讨论了时效制度,微观组织和断裂韧性之间的关系.关键词:Al-Li合金;断裂韧性;时效;显微组织;......
......