共搜索到10297条信息，每页显示10条信息，共1030页。用时：0小时0分0秒656毫秒
number decreased. SHEIKHOLESLAMI et al [18] investigated nanofluid flow in a semi-porous channel in the presence of uniform magnetic field. They found that that the velocity boundary layer thickness......
, 2009: 20-33. BIAN Fengqing. The restored eroded thickness and prototype basin of Kongdian formation and the fourth member of the Shahejie formation in Dongying depression[D]. Qingdao: Ocean University......
no-slip wall boundary condition was chosen. An adiabatic boundary condition was applied around the model, and the thickness of the pipe wall was ignored. The contact coil of droplet flow......
TEM investigation of the deformed material, slices of the compressed sample was first cut parallel to the compression direction, and then thinned by grinding to a sheet with 100 mm in thickness......
for the thermal storage performance test, as shown in Figure 6, has been used in the thermal storage performance experiment. It is made of steel plates of 2 mm thickness, with sizes of 125 cm×30 cm×30 cm......
lamellar, in (α+β) and β-phase field (heating rate 2 °C/s, cooling rate 15 °C/s, Td-deformation temperature) Ti6Al4V samples, in the deformed conditions, were cut to about 3 mm in thickness and 15 mm......
by quenching into water at room temperature. For indentation measurements, samples around 2 mm in thickness were cut using an Isomet speed saw with a diamond disc from the bars with a diameter of 10 mm......
that accelerates the dissolution of copper (localised attack); and finally, formation of a passive film (e.g., Ag2S, Cu2S and Ag3CuS2) [15,20,21]. The localised corrosion is influenced by the thickness......
microscope to examine the large pore (flaw) size (>1 mm) distribution at individual section. Totally 8 pieces with approximate thickness of 10-15 mm are scanned from each specimen. Figure 5 Prismatic......
an idea about the thickness of the boundary layer, thus, the higher the intercept, the thicker the boundary layer [43]. If the plot of qt vs t1/2 gives a straight line, then adsorption process......
