共搜索到16014条信息,每页显示10条信息,共1602页。用时:0小时0分0秒520毫秒
tribological characteristics of the oxide coatings were also investigated by SEM, XRD, XPS, microhardness analysis and ball-on-disc friction testing, respectively. It is found that the addition of Na2WO4... by the addition of Na2WO4. The fraction of forsterite Mg2SiO4 in the oxide coating increases with increasing concentration of Na2WO4 in base electrolytes. Furthermore, the microhardness and wear resistance......
the remained mass from the original mass. The wear testing parameters are summarized in Table 2. Table 2 Tribological test parameters. 3 Results and discussion 3.1 Microstructure and phase of TiCN...Trans. Nonferrous Met. Soc. China 25(2015) 3716-3722 Friction and wear behaviors of TiCN coating based on electrical discharge coating Zhao-yubo ZENG, Hou-qun XIAO, Xiao-hua JIE, Yan-mei ZHANG School......
Trans. Nonferrous Met. Soc. China 30(2020) 65-75 Microstructure, mechanical properties and two-body abrasive wear behaviour of hypereutectic Al-Si-SiC composite Raj Kumar SINGH1, Amit TELANG1... removal mechanism on two-body abrasive wear behaviour of hypereutectic Al-Si-SiC composite and its matrix alloy were investigated. The hypereutectic Al-Si-SiC composite was prepared by stir casting route......
J. Cent. South Univ. (2019) 26: 2961-2973 DOI: https://doi.org/10.1007/s11771-019-4228-y Tribological and wear performance of centrifuge cast functional graded copper based composite at dry sliding... was investigated using pin-on-disc tribo-tester. Rate of wear and friction coefficient of the inner wall thickness of hollow cylindrical cast specimen was analyzed using Taguchi based L27 orthogonal array......
......
. Then, they were used in the wear testing experiment. The mass loss of the pin specimens and disk due to sliding wear was measured by a precision electronic balance having an accuracy of 0.01 mg. The results... Dry sliding wear behavior of Al2O3 fiber and SiC particle reinforced aluminium based MMCs fabricated by squeeze casting method WANG Yi-qi, SONG Jung-il Department of Mechanical......
wear characteristics of Al2O3/PA1010 composite coatings on the surface of quenched and low-temperature temper steel 45 were tested on the template abrasive wear testing machine and the same uncoated...Abrasive wear characteristics and mechanisms of Al2O3/PA1010 composite coatingsJIA Xian, and LING Xiaomei1) Department of Science and Technology, University of Science and Technology Beijing, Beijing......
......
Influence of rutile (TiO2) content on wear and microhardness characteristics of aluminium-based hybrid composites synthesized by powder metallurgy C. ANTONY VASANTHA KUMAR1, J. SELWIN RAJADURAI2 1... of Engineering, Tirunelveli 627007, Tamilnadu, India Received 1 February 2015; accepted 18 June 2015 2) content on the wear and microhardness properties of aluminium (Al)-based hybrid composites......
on the wettability of WC-CrCo metal ceramic coatings [J]. Surface and Coatings Technology, 2018, 334: 429-437. [7] STRINGER J, MARSHALL M B. High speed wear testing of an abradable coating [J]. Wear...Trans. Nonferrous Met. Soc. China 29(2019) 1439-1448 Improving impact wear resistance of Ti-6Al-4V alloy treated by laser shock peening Mei-gui YIN1, Zhen-bing CAI1, Zhen-yang LI1, Zhong-rong ZHOU1......