共搜索到1285条信息,每页显示10条信息,共129页。用时:0小时0分0秒749毫秒
, the transmission electron microscopy (TEM) was utilized. The tested thin foils were prepared by twin-jet electro-polishing at 20 V in a solution consisting of 30% nitric acid and 70% methanol (vol.%) at –25 °C......
. And the TEM foils were prepared by a twin-jet electro polishing unit with a solution of 30% nitric acid and 70% methanol at –30 °C. High-angle annular dark-field scanning transmission electron microscopy......
] GOMATHISANKAR P, HACHISUKA K, KATSUMATA H, SUZUKI T, FUNASAKA K, KUNIHIRO F, KANECO S. Enhanced photocatalytic hydrogen production from aqueous methanol solution using ZnO with simultaneous......
, USA). Dichloromethane was obtained from Merck (Darmstadt, Germany). Methanol was obtained from Sigma. In-vitro cytotoxicity and cell culture studies were performed using Dulbecco’s modified Eagle’s......
of 59% methanol + 35% ethanol + 6% perchloric acid. EBSD observation was performed on Quanta 200FEG. Table 1 Chemical compositions of V-10Cr-5Ti alloy (mass fraction, %) Figure 1 shows......
carbon from soils. 2 Materials and methods Endosulfan analytical standard (99% pure) was purchased from Dr. Ehrenstorfer, Germany. Anhydrous sodium chloride (NaCl) was utilized. Methanol used was 99......
-polishing with a solution of 10% perchloric acid, 20% 2-butoxy ethanol and 70% methanol. Observations were carried out using a fully automated EBSD system (Oxford Instruments) equipped on a field emission......
friendly solvents (e.g., water, methanol, benzyl alcohol, etc.) in different process conditions to produce recyclable products [1-6]. The conventional chemical recycling process involves the breaking down......
in the aqueous and organic phases was determined by using HPLC (Shimadzu LC-2010AHT) with an XDB-C18 column and a UV detector at 280 nm. The mobile phase was a solution of water and methanol (3/7, v/v) at a flow......
by the standard procedure of jet electro-polishing in 20% solution of nitric acid in methanol. The SEM and XRD studies were carried out on the rolling plane of the samples taken from the central part......