共搜索到1285条信息,每页显示10条信息,共129页。用时:0小时0分0秒885毫秒
densities of each composite [4]. The experimental density for each composite was evaluated by weighing the test sample using a high precision electronic weighing balance with a tolerance of 0.1 mg......
J. Cent. South Univ. (2018) 25: 2199-2218 DOI: https://doi.org/10.1007/s11771-018-3908-3 A method of searching fault propagation paths in mechatronic systems based on MPPS model WANG Yan-hui(王艳辉)1, 2, 3, LI Man(李曼)1, 2, 3, SHI Hao(史浩)1, 2 1. State Key Laboratory of Rail Traffic Control and Safety,......
Transactions A, 2018, 49(9): 3896-3907. [46] HARDY M C, ZIRBEL B, SHEN G. Developing damage tolerance and creep resistance in a high strength nickel alloy for disc applications[J]. Superalloys, 2004(2004......
, the sterility rate Ir is set to zero and check the tolerance to find out whether it exceeds the maximum limit . The maximum limit of Ir is set as four for the oestrus period of the female lion. The female......
tolerance for the changes of the scatterers as well as the level of scattering noise. Furthermore, it is found that simply utilizing the backscattering intensity along vertical direction is not enough......
: 10.1002/2017gl075710. [9] WANG Rao, LI Qing-yong, YU Hao-min, CHEN Ze-chuan, ZHANG Ying-jun, ZHANG Ling, CUI Hou-xin, ZHANG Ke. A category-based calibration approach with fault tolerance for air monitoring sensors [J......
DC power supply, solution (20% perchloric acid + 80% methanol), and reference electrode (stainless steel). The polishing of samples (3 mm in diameter and 0.1 mm in thickness) for TEM study......
consisting of methanol, ethylene glycol and the required nitrate. Subsequently, the resulting solution was dried and calcined at a certain temperature to produce 3DOM perovskite-type oxides. However......
, 2020, 66(4): e16877. [94] ZENG Liang, WEI Di, TOAN S, et al. Sorption-enhanced chemical looping oxidative steam reforming of methanol for on-board hydrogen supply[EB/OL]. [2020-09-04]. https......
and finally thinned by the twin-jet electropolishing using a solution of 80% methanol and 20% nitric acid at approximately -25 °C, with a potential of 14 V. Aberration corrected high angle annular......