共搜索到15924条信息,每页显示10条信息,共1593页。用时:0小时0分0秒562毫秒
in aluminum hot tandem rolling[J]. Aluminum Processing, 2007(1): 5-9. [9] 孟令启, 李成. 中厚板轧机测量测试与力学行为建摸[M]. 郑州: 黄河水利出版社, 2006: 205-218.MENG Ling-qi, LI Cheng. Plate mill test and measurement of the mechanical......
of slope seismic stability[J]. Rock and Soil Mechanics, 2003, 24(4): 553-556. [3] LIN Meei-ling, WANG Kuo-lung. Seismic slope behavior in a large-scale shaking table model test[J]. Engineering Geology......
of time history of concrete basement acceleration at load point position 表1 广-深线车体垂向振动加速度实测及理论计算对比表 Table 1 Vehicle vertical acceleration comparison between field test data and theoretic......
-supported curtain walls[J]. Structural Engineers, 2005, 21(2): 17-21. [8] 王永焕, 徐海翔, 徐天爽. 北京长安中心点式玻璃幕墙工程索桁架静载试验[J]. 钢结构, 2007, 22(8): 4-7.WANG Yong-huan, XU Hai-xiang, XU Tian-shuang. Static load test......
(EDS, INCA Energy 350) and micro-hardness tester (HXL-1000AY). In micro-hardness test the load and holding time were 0.49 N and 10 s, respectively. Table 1 Nominal and actual compositions......
universal testing machine. Impact test was conducted on these specimens in XJJ-50 strut-beam impact machine at room temperature. Their hardness was tested using HB-3000 Brinell hardness tester. After......
-cutting machine from cast ingots. Tensile tests were conducted at room temperature with an initial strain rate of 10-3 s-1 on a universal testing machine. Four specimens were used for each test condition......
. An initial retard of 600 s was set to obtain a stable testing system after each sample was immerged in 3.5% NaCl solution, and then the electrochemical impendence spectroscopy (EIS) test was measured......
of 8 mm by using MTS 880 material test systems. The loading velocity was selected as low as 0.5 mm/min. Fig.1 shows the typical axial force-displacement curves of both AC and DS Tb0.36Dy0.64Fe1.9......
with transverse anisotropy was used. The uniaxial tension test is employed to obtain the aluminum alloy (5052 O) properties (shown in Table 1). And the anisotropic plastic behavior was described with Hill’s......