共搜索到15874条信息,每页显示10条信息,共1588页。用时:0小时0分0秒984毫秒
the base, as well as, the presence of a near-surface hard layer or other complex conditions, the retaining wall can still be designed for C-f soil with just some changes in formulation.6 Critical......
a partially recrystallized structure can be observed for schedule No. 2, with the middle layer structure deformed after the second and following passes. In addition, the termination......
shear were developed by NIE et al [1] and WU et al [12] respectively. In their model, the effect of interlayer slip was considered by assuming shear deformable infinitely thin layer between... slip effect was modeled as a thin shear-layer. The maximum deflections calculated from QEM for different shear connection stiffness are compared with those from FEM and analytic solution offered by NIE......
with the same size as the sample holding stage, and then the block is fixed on the stage by the conductive adhesive. The prepared sample block is firstly sprayed with a conductive layer and then placed......
, HIRAJIMA T, MIKI H, SASAKI K. Silicate covering layer on pyrite surface in the presence of silicon–catechol complex for acid mine drainage prevention [J]. Materials Transactions, 2015, 56: 1733-1741. [30......
. [5] KIM Y T, IKEDA K K. Flow behaviour of the billet surface layer in porthole die extrusion of aluminium [J]. Metallurgical and Materials Transactions A, 2000, 31(6): 1635-1643. [6] den BAKKER A J......
, it is reasonable to mine to -85 m level in Xinli mining area of Sanshandao Gold Mine, and the thickness of safety isolation layer must be more than 40 m, which is consistent with the experiment results......
, acridine orange (AO)/ propidium iodide (PI). Mix the working solution (66.7 μg/mL AO and 33.4 μg/mL PI) with bacteria and incubate for 30 min at room temperature and keep in dark place. Take single layer......
specimens were rinsed with de-ionized water, degreased by ethanol, and ultrasonically-cleaned with acetone at 40 °C for 15 min to eliminate any residual oxide layer and debris from the CGP operation......
particles are adsorbed on the surface of big irregular bulk shaped substances. Combined with the XRD, EDS and Raman results, the tiny particles that are adsorbed on the outer layer may be As2S3......