共搜索到1772条信息，每页显示10条信息，共178页。用时：0小时0分0秒859毫秒
), a high-magnification image reveals that the matrix was polycrystalline, with a grain size of approximately 50 nm. EDS-1 and EDS-2 suggest that the matrix contained ~36% Al, ~48% Fe (mole fraction) (Table 4......
. (1)), in crystalline materials for example metals, the yield stress, as a criterion for the strength of polycrystalline materials, increases dramatically by grain refinement [13] σy=σ0+kyd-1/2 ......
indicate that the samples possess a polycrystalline structure that is composed of randomly oriented fcc Pd and that one of the lattice fringe spacings is 0.224 nm, which is consistent with the distance......
investigations were performed based on the direct application of Hall-Petch relationship. It is deemed imperative to produce nanocrystalline (NC) materials from the coarse-grained polycrystalline......
) plane of hexagonal phase of ZnS. This result confirms formation of crystalline nanorods. The polycrystalline nature of the sample is validated by SAED pattern (Fig. 2(d)) presenting a set of rings......
for tissue engineering [J]. Materials Science and Engineering C, 2017, 71: 1253-1266. [6] DIBA M, GOUDOURI O M, TAPIA F, BOCCACCINI A R. Magnesium-containing bioactive polycrystalline silicate-based......
dynamic recrystallization in polycrystalline metals [J]. Scripta Materialia, 2005, 52(4): 299-304. AlCu4SiMg合金的动态再结晶体积分数模型构建及其在有限元模型中的应用 权国政1,施瑞菊1,赵 江1,刘 乔1,熊 威2,邱慧敏1 1. 重庆大学 材料科学与工程学院 机械传动国家重点实验室,重庆......
reported its CRSS to be ~4 MPa and the CRSS for prismatic slip ~2.5 MPa. In polycrystalline pure Zr, KNEZEVIC et al [12] estimated CRSS to be close to that for prismatic slip above 600 °C......
-GRAEVE I, LAPEIRE L, VERBEKEN K, KESTENS L, TERRYN H. Gold nanoplating as a new method for the quantification of the electrochemical activity of grain boundaries in polycrystalline metals [J......
non-dissimilar FS welds. They obtained a high-quality weld using the polycrystalline cubic boron nitride (PCBN) tool and optimum FSW parameters. SAEID et al [18] studied the influence of the welding......
