共搜索到17975条信息，每页显示10条信息，共1798页。用时：0小时0分0秒546毫秒
Microstructure and properties of joint for stirring brazing of dissimilar Al/Mg alloy during heating processesHui-Bin Xu,Hui-Bin Sun,Hui Yang,Lu-Xin Chi,Jun ChenSchool of Materials Science... effects of the brazing temperature on microstructure and shear strength of the joint were investigated. The diffusion zone is found at joint interface near Al base metal,which consists of Al–Zn–Sn solid......
Transition and fracture shift behavior in LCF test of dissimilar welded joint at elevated temperatureXiongfei Wang1,Chendong Shao1,Xia Liu2,Fenggui Lu11. Shanghai Key Laboratory of Materials Laser...="ChDivSummary" name="ChDivSummary">This work focused on the low-cycle fatigue(LCF) behavior of modified 9Cr/CrMoV dissimilar welded joint at elevated temperature. Narrow gap submerged arc welding(NG-SAW......
, SPR, friction stir welding (FSW) and adhesive bonding, have been used by manufacturers to joint dissimilar metals [8]. Resistance spot welding (RSW) is a process in which contacting metal surfaces... Press and Springer-Verlag GmbH Germany, part of Springer Nature 2018 Abstract: The microstructure and mechanical properties of dissimilar pinless friction stir spot welded joint of 2A12 aluminum alloy......
">The mechanical properties, creep rupture strength, creep damage and failure characteristics of dissimilar metal welded joint (DMWJ) between martensitic (SA213T91) and bainitic heat-resistant steel...Influence of Creep Strength of Weld on Interfacial Creep Damage of Dissimilar Welded Joint between Martensitic and Bainitic Heat-Resistant Steel张建强1,2,ZHANG Guodong2,LUO Chuanhong2,ZHANG Yinglin21......
Micromechanical Analysis of In-Plane Constraint Effect on Local Fracture Behavior of Cracks in the Weakest Locations of Dissimilar Metal Welded JointJie YangSchool of Energy and Power Engineering, University of Shanghai for Science and Technology摘 要:In this work, a set of GTN(Gurson–Tvergaard–Needleman) parameters of the Alloy52 M dissimilar metal......
distribution in the joint [14]. In the present study, the distributions of Mg in the FSSW joints of the dissimilar combinations, T5B6 and T6B5 were analyzed using EPMA. Finally, EBSD was employed...Trans. Nonferrous Met. Soc. China 22(2012) s605-s613 Material properties of friction stir spot welded joints of dissimilar aluminum alloys Chi-Sung JEON1, Sung-Tae HONG2, Yong-Jai KWON3, Hoon-Hwe......
Abstract: The effects of heat input on the microstructures and mechanical properties of tungsten inert gas (TIG) butt-welded AZ31/MB3 dissimilar Mg alloys joint were investigated by microstructural... input on microstructure and mechanical properties of butt-welded dissimilar magnesium alloys joint [J]. Journal of Central South University, 2018, 25(6): 1358–1366. DOI: https://doi.org......
in Fig.2. As shown in Fig.2, no obvious welding defect was found in the joint, indicating that Fig.1 Surface appearance of dissimilar weld prepared by FSW sound weld of 5052 Al alloy and AZ31 Mg... dissimilar friction stir weld: (a) Tensile fracture location; (b) SEM image of fracture surface 2) Microstructure of the base metal was replaced by equiaxed and fine grains in stir zone. At the top......
Mechanical and Galvano-chemistry Property Variation within Dissimilar Metal Weld between 1Cr18Ni9Ti and 1Cr13 Stainless SteelYongtao Zhao ,Junhui Dong,Yonglin Ma,Liping Zhao and Xiaobing Pei Material... the microstructure and properties variation of the weld metal in the dissimilar stainless steels during the argon tungsten-arc welding process.Because of the existence of different materials and chemistry......
Effect of Heat Input on the Microstructure and Properties of Dissimilar Weld Joint Between Incoloy 28 and Superaustenitic Stainless SteelM.S.Abdel Rahman,N.A.Abdel Raheem,M.R.El KoussyDepartment... on the microstructure and the corresponding mechanical and corrosion properties of dissimilar joint between superaustenitic stainless steel(UNS S31254) and Incoloy 28(UNS N08028).The two materials were......
