共搜索到13160条信息,每页显示10条信息,共1316页。用时:0小时0分0秒296毫秒
Electrochemical Study of Diffusion Bonded Joints between Micro-duplex Stainless Steel and Ti6A14V AlloyShaily M.Bhola1,Sukumar Kundu1,2,Rahul Bhola1,Brajendra Mishra1,Subrata Chatterjee21. Department...="ChDivSummary">In the present study,corrosion behavior of diffusion bonded joints formed between micro-duplex stainless steel(MDSS) and Ti6AI4V alloy(TiA)(at 900 ℃ for 60 min under 4 MPa uniaxial pressure......
between titanium alloy and stainless steel [J]. Iron Steel Vanadium Titanium. 2005, 26(4): 55-59 [11] GHOSH M, CHATTERJEE S. Characterization of transition joints of commercially pure titanium to 304... HIP diffusion bonding of P/M titanium alloy Ti-6Al-4V and stainless steel 1Cr18Ni9Ti LANG Ze-bao(郎泽保), WANG Liang(王亮), ZHANG Xu-hu(张绪虎) Aerospace Research Institute of Materials and Processing......
Formation and evolution of layered structure in dissimilar welded joints between ferritic-martensitic steel and 316L stainless steel with fillersGuoliang Liu1,2,Shanwu Yang1,Jianwen Ding1,Wentuo... during electron beam welding(EBW) to obtain a reliable dissimilar joint between reduced-activation ferritic-martensitic(RAFM) steel and 316L austenitic stainless steel.It was observed that the layered......
Trans. Nonferrous Met. Soc. China 24(2014) 1666-1673 Thermal cycling behavior of alumina-graphite brazed joints in electron tube applications Nandadulal DANDAPAT1,2, Sumana GHOSH1, Kalyan Sundar PAL3... and helium leak tests show that the initial and thermal cycled brazed samples are devoid of cracks or any other defects and hermeticity in nature. Brazing strength of the joints is found to be satisfactory......
Electrochemical Corrosion Behavior of the Laser Continuous Heat Treatment Welded Joints of 2205 Duplex Stainless Steel刘和平,金学军School of Materials Science and Engineering,Shanghai Jiao Tong University摘 要:The electrochemical corrosion behaviors of the welded joints of 2205 duplex stainless steel with the laser continuous heat treatment were investigated......
properties of A-TIG weld joints are also superior to those of C-TIG (conventional TIG) welding.Key words:A-TIG welding; activated flux; 304 stainless steel; full penetration; mechanical properties... Institute for Industrial Technology), Guangzhou 510650, China)Abstract:AISI 304 stainless steel plates were welded with activated flux tungsten inert gas (A-TIG) method by utilizing self-developed......
J. Cent. South Univ. (2018) 25: 2578-2588 DOI: https://doi.org/10.1007/s11771-018-3937-y Development and characterization of hot dip aluminide coated stainless steel 316L Sehrish MUKHTAR1, Waqas... Germany, part of Springer Nature 2018 Abstract: Stainless steel (SS) grade 316L is used for orthopedic implants due to its biocompatibility; yet the effort should be done to minimize the carcinogenic......
Key Technique of Austenitic Stainless Steel on-line Solution Treatment LIU Shuang1,ZHAO Fei2,LI Ying2,LI Wei-juan1,LI Sheng-li1 (1.Anshan University of Science and Technology, Anshan, 114044;2.Dalian Jinniu Co. Ltd. , Dalian, 113000, P. R. China) 摘要:Generally the methods of solution treatment of austenitic stainless steel are bifurcated on-line solution and off-line solution . For a founded......
transformation diffusion bonding of titanium alloy with stainless steel[J]. Materials Characterization, 2006, 56(1): 32-38. [8] GHOSH M, CHATTERJEE S. Characterization of transition joints of commercially... Electron beam welding of Ti-15-3 titanium alloy to 304 stainless steel with copper interlayer sheet WANG Ting(王 廷), ZHANG Bing-gang(张秉刚), CHEN Guo-qing(陈国庆), FENG Ji-cai(冯吉才), TANG Qi(唐 奇) State......
Effect of welding process on the microstructure and properties of dissimilar weld joints between low alloy steel and duplex stainless steelJing Wang1), Min-xu Lu1), Lei Zhang1), Wei Chang2), Li-ning...) welding for duplex stainless steel (DSS) and low alloy steel were compared in this paper. The microstructure and corrosion morphology of dissimilar weld joints were observed by scanning electron......