共搜索到3032条信息，每页显示10条信息，共304页。用时：0小时0分2秒265毫秒
[4,5]. The subject with respect to effects of intermetallic phase formation and eutectic reaction during solidification on the fluidity and feeding ability of residual liquid in ferrous and Al alloys... of the modification of iron-bearing intermetallic and eutectic Si on the mechanical behavior near the solidus temperature in Al-Si-Cu 319 cast alloy [J]. Physica B: Condensed Matter, 2019, 560: 126-132. [9] MATSUDA......
order: R300 Key words: Al-Mg2Si alloy; friction stir processing; ultimate tensile strength; microstructural evolution; defect 1 Introduction As the only stable intermetallic compound in the Mg-Si..., Mg2Si intermetallic compounds can be produced using common casting processes. An aluminum alloy with high Si and Mg contents generates a substantial amount of Mg2Si during the casting process......
conform to the Al-Mn-Fe phase instead. This eutectic intermetallic constituent, Al(Mn,Fe), has also been detected by DAVOODI et al [30] in AA3003 alloy after a braze-simulation treatment. The EDS map.... 2005, 18: 370-376. [30] DAVOODI A, PAN J, LEYGRAF C, NORGREN S. The Role of intermetallic particles in localized corrosion of an aluminum alloy studied by SKPFM and integrated AFM/SECM [J]. Journal......
and heat-resistant properties of these alloys [20, 21]. Nevertheless, POURBAHARI et al [22] suggested that the branched (Mg,Al)3Gd intermetallic compound would induce microvoid initiation sites and stress...: 10.1016/j.corsci.2011. 10.038. [21] POURBAHARI B, MIRZADEH H, EMAMY M. Elucidating the effect of intermetallic compounds on the behavior of Mg-Gd-Al-Zn magnesium alloys at elevated temperatures [J......
-long, TIAN Jing, XU Li-juan. Review of the investment casting of TiAl-based intermetallic alloys [J]. Acta Metallurgica Sinica, 2013, 49: 1281-1285. (in Chinese) [5] KIM Y W, KIM S L. Advances..., MAYER S. Intermetallic titanium aluminides in aerospace applications-processing, microstructure and properties [J]. Materials at High Temperatures, 2016, 33: 560-570. [33] TILLER W A, JACKSON K......
caused these intermetallic compounds to be applied in advanced industrial gas turbines, internal combustion engines and power generation plant. Nickel silicides were also used in microelectronics... influence on the mechanical properties of a nickel silicide based intermetallic alloy [J]. Intermetallics, 1997, 5: 137-145. [10] TAKASUGI T, KAWAI H, KANENO Y. The effect of Cr addition on mechanical......
matrix is surrounded by eutectic Si walls. Moreover, Mg element is segregated along eutectic walls and intermetallic eutectic compounds (Mg2Si) with Si elements forms. The hardness values... of cell boundary of printed AlSi10Mg can be revealed, and it is mainly composed of precipitated Si particles, Mg2Si intermetallic eutectic compounds and entangled dislocations [36]. The formation of cell......
of Crystal Growth, 2011, 322(1): 84-90. [31] GAO X, NIE J F. Structure and thermal stability of primary intermetallic particles in an Mg-Zn casting alloy [J]. Scripta Materialia, 2007, 57(7): 655-658.... The effect of Al8Mn5 intermetallic particles on grain size of as-cast Mg–Al–Zn AZ91D alloy [J]. Intermetallics, 2010, 18(8): 1683-1689. [47] MA Yan-long, PAN Fu-sheng, ZUO Ru-lin. Review......
of intermetallic compounds [6]. Conventionally, HEAs comprise more than five principal elements mixed in an equiatomic or near-equiatomic fraction. However, the criterion for HEA design has now been extended... for ordering or clustering, thus a more negative value of enthalpy of mixing can promote the formation of intermetallic compounds and ordered phases [24,25]. Secondly, the large value of △ could increase......
of epoxy composite filled with industrial wastes [J]. Journal of Cleaner Production, 2019, 237: 117588. [44] YENER T, ERDOGAN A, GOK M S. Nb and B effect on mechanical properties of Ti-Al based intermetallic... of Fe-Al intermetallic coating prepared by hot-dip aluminizing and diffusion [J]. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2016, 47(5): 2232-2242. [47] da......
