共搜索到4608条信息,每页显示10条信息,共461页。用时:0小时0分0秒265毫秒
grains. Furthermore, the (001) texture of FePt grains increases with increasing Ag underlayer thickness. However, with Ag top layer given, it can only be observed that the ordering of FePt grains......
surfaces have a spongy-capillary texture.关键词:......
; route D is the unidirectional rolling. The strain states of rolled sheets were analyzed by the finite element method, while the microstructure and texture were observed using optical microscopy, X-ray.... Compared with other samples, sample D exhibited a homogeneous microstructure with fine grains as well as a weak and tilted texture, in corresponding, it performed excellent tensile properties, which......
at the liquid-nitrogen temperature to the strain of 4% and 8%. The microstructure and texture of the rolled sheets were investigated via scanning electron microscopy(SEM), electron backscatter diffraction... direction(RD) and transverse directions(TD). The microstructural and textural evolutions of the alloy during cryorolling were investigated. Due to active twining during rolling, the initial texture......
. Comparisons of the texture, hardness, roughness, tribological and electrochemical corrosion behaviors of the two types of TiN films were given. The TiN films obtained by the FCAP technology were found to be highly uniform, smooth and macroparticle-free. The TiN films deposited by FCAP had a (111) preferred orientation, while there was no texture in the films deposited by MAIP. Under low load the two......
of Al2Ca particles are influenced evidently by extrusion temperature. Unlike previous reports, the intensity of basal texture increases with increasing extrusion temperature, and the reasons are analyzed... and 623 K. The reason is speculated as the balance of grain size, Al2Ca phase and texture at the two temperatures. The work hardening rate depends on extrusion temperature, and the largest θ value......
texture depth for SSAM with different voidage,and the BPN of SSAM and SMA before after wet track abrasion were measured.The experimental results indicate that the surface texture depth increases......
texture and internal pore structure of aggregate particles for different size and gradation were numerically represented by sphericity (ψ) and shape index (SI), angularity number (AN), index of aggregate particle shape and texture (IAPST), porosity and pore size, respectively. The results show that SCR is a porous and rough aggregate. Apparent density, void, water absorption and smashing index......
of Laves phases in SLMed Inconel 718 samples. Moreover, circular beam oscillation enhances the <001> texture of thin walls and the <101> texture of cuboid samples. The improvement of formability......
and calculation, the main texture components of the ink-affected sample are Goss {110}<001> and R {124}<211>, and that of the ink-free sample are Brass {110}<112>, Copper {112}<111> and S {123}<634>. Besides, a clear difference of slip systems is found between the ink-free and ink-affected microgrooves, and the results show that R texture is easier to form on the ink-affected......