共搜索到348条信息,每页显示10条信息,共35页。用时:0小时0分0秒437毫秒
and ion beam sputtering as surface preparation methods for XPS analysis of PVD coatings [J]. Thin Solid Films, 2000, 377-378: 473-477. [10] SCHOSER S, BRAUCHLE G, FORGET J, KOHLHOF K, WEBER T, VOIGT J......
and magnetron sputtering process [J]. Acta Mater, 2009, 57(17): 4974-4987. [20] CHEN C S, LIU C P, TSAO C Y A, YANG H G. Study of mechanical properties of PVD ZrN films, deposited under positive and negative......
A, ICHIMURA H, IWATA Y, ONO S. Development of PVD ceramic coatings for valve seats [J]. Surface and Coating Technology, 1996, 86-87(1-3): 212-217. [3] HILTON M R, NARASIMHAN L R, NAKAMURA S, SALMERON..., 68-69: 556-563. [10] KARVANKOVA P, VEPREK-HEIJMAN M G J, ZINDULKA O, BERGMAIER A, VEPREK S. Super hard nc-TiN/a-BN and nc-TiN/a-TiBx/a-BN coatings preparedby plasma CVD and PVD:A comparative study......
sputtering (HIPIMS) is an important physical vapor deposition (PVD) process in which the power density exceeds conventional power density by about three orders of magnitude. Electrostatic probe......
(PVD) using the arc bond sputtering technique. The Ti-6Al-4V workpiece was 10 mm in diameter and 10 mm in length for all tests. Fig. 1 Process flow diagram for entire tracing frequency system......
(99.9995%, mass fraction) has a wide application in physical vapor deposition (PVD) sputtering targets [20], in which a refined and uniform grain structure is desirable. However, in the solidification......
. [3] HEFTI L D. ASM metals handbook, surface engineering [M]. Ohio: ASM International, 1993. [4] LUGSCHEIDER E, G, BARIMANI C, ZIMMERMANN H. PVD coatings on aluminium substrates [J]. Surface......
that silver nanoneedle structures can be synthesized by using CVD, PVD, electrical sputtering and other techniques. Because complex processes are needed to obtain needle structure of silver, the use......
, BANFIELD S, WILSON J C AVELAR-BATISTA, HOUSDEN J, LEYLAND A, MATTHEWS A, CASSAR G. Corrosion behaviour of triode plasma diffusion treated and PVD TiN-coated Ti-6Al-4V in acidified aqueous chloride......
) Hi-2 (Class II), (c) Hi-7 (Class I)) and DCMS (d) In PVD systems, the chemical composition of impinging particles onto the substrate defines the texture, the morphology, and the density of layers [53... by experimental test at the optimum condition and results in a deposition rate of 16.7 nm/min. References [1] PRADHAN S, NOUVEAU C, VASIN A, DJOUADI M A. Deposition of CrN coatings by PVD methods for mechanical......