共搜索到2195条信息,每页显示10条信息,共220页。用时:0小时0分0秒340毫秒
Microstructural Evolution of Infrared Brazed CP-Ti Using Ti-Cu-Ni BrazesT.Y.Yeh,R.K.ShiueDepartment of Materials Science and Engineering,National Taiwan University摘 要:Microstructural evolution of infrared vacuum brazed CP-Ti using two Ti-based braze alloys,Ti-15Cu-15Ni and Ti-15Cu-25Ni,has been investigated.The infrared brazed joint consisted......
......
nanocrystallization (by surface severe plastic deformation) and plasma electrolytic carburizing on CP-Ti was investigated. Skewness and kurtosis of Gussian shape distribution curves were studied and the effect... that there is an optimum level for time on surface roughness increasing (difference between two measured data). Key words: surface nanocrystallization; hard layer; roughness; CP-Ti  ......
Article ID: 1003-6326(2005)06-1264-11 Effect of mandrel on cross section quality of thin-walled tube numerical controlled bending GU Rui-jie(谷瑞杰), YANG He(杨 合), ZHAN Mei... with the structure of ball and socket on the cross section quality of thin-walled tube numerical controlled(NC) bending was studied by numerical simulation method, combined with theoretical analysis......
......
Explicit FE wrinkling simulation and method to catch critical bifurcation point in tube bending process YANG He(杨 合), LI Heng(李 恒), ZHAN Mei(詹 梅), GU Rui-jie(谷瑞杰) Department of Materials Forming...-walled tube NC bending process. In the study, a dynamic explicit FE model for aluminum alloy thin-walled tube NC bending process is developed to predict the wrinkling by using FE code ABAQUS/Explicit......
-walled Y-shaped tube was investigated. With axial feeding, tube material can be pushed into the die cavity to form a higher protrusion height with relatively small thinning ratio. For the Y-shaped tube, however, owing to the high-friction forces acting at internal pressure in the guiding zone between the tube and die, less metal flows into the protrusion. A multistage punch was proposed to change......
Forming characteristics of thin-walled tube bending process with small bending radius LI Heng(李 恒) , YANG He(杨 合), ZHAN Mei(詹 梅), GU Rui-Jie(谷瑞杰) Department of Materials Forming and Control Engineering, Northwestern Polytechnical University,Xi’an 710072, China Received 10 April 2006; accepted 25 April 2006 Abstract: Currently requirements of thin-walled tube with small......
......
Effects of Ca addition on tensile properties and microstructures of hot-extruded AZ91 alloy tube WANG Feng(王 峰)1, LIU Zheng(刘 正)1, YU Bao-yi(于宝义)1, ZHANG Kui(张 奎)2 1. School of Materials Science... 2006 Abstract: As-cast AZ91+XCa (X=0, 0.5%, 1.0%, 1.5%, mass fraction) magnesium alloys were extruded into tube at 380℃ with an extrusion ratio of 6:1. The tensile properties and microstructures......