共搜索到1276条信息，每页显示10条信息，共128页。用时：0小时0分0秒312毫秒
Joining Performance and Microstructure of the 2024/7075 Aluminium Alloys Welded Joints by Vaporizing Foil Actuator Welding孟正华1,2,WANG Xu1,GUO Wei1,HU Zhili1,Anupam Vivek3,HUA Lin1,Glenn S DAEHN31.... Department of Materials Science and Engineering, The Ohio State University摘 要:Vaporizing foil actuator welding(VFAW) was used for joining 2024-T3 and 7075-T6......
and dissimilar materials, for example, aluminum and magnesium, this joining technology is well developed. The joining mechanism and process characteristics of FSpW have been widely studied. However...Refill Friction Stir Spot Welding of Similar and Dissimilar Alloys:A ReviewXiao-Song Feng1,Song-Bin Li2,Li-Na Tang2,Hui-Min Wang31. Shanghai Aerospace Equipments Manufacturer Co,Ltd2. Shanghai......
) in 1991 is a potential candidate for the joining of dissimilar materials due to its advantageous lower processing temperature over conventional fusion welding [15]. There are several studies on the FSW... Trans. Nonferrous Met. Soc. China 22(2012) 299-304 Interface characteristic of friction stir welding lap joints of Ti/Al dissimilar alloys CHEN Yu-hua, NI Quan, KE Li-ming National Defense Key......
Joining of Cf/SiC composite to GH783 superalloy with NiPdPtAu-Cr filler alloy and a Mo interlayerWen-Wen Li,Bo Chen,Hua-Ping Xiong,Wen-Jiang Zou,Hai-Shui RenWelding and Plastic Forming Division, Beijing Institute of Aeronautical Materials摘 要:With assistance of Mo interlayer, joining of Cf/Si C composite to GH783 superalloy was carried out using Ni Pd Pt......
to Mg [11], Al to Cu [12], Al to steel [13]. All these investigations concluded that the formation of the brittle intermetallic compounds in the stir zone is unavoidable while joining dissimilar... welds between AA6061 and AA5086 plate material, demonstrating the unique capabilities of the process in dealing with joining of dissimilar aluminium alloys. In friction stir welding, the joining......
to investigate the dissimilar joints and the intermetallic properties produced by a welding condition. Friction Melt Bonding(FMB) is a recently developed technique for joining dissimilar metals that also does... for the development of dissimilar metal joining processes and facilitate to reach the requiring load bearing capacity of the joints.关键词:......
Interfacial bonding mechanism in Al/coated steel dissimilar refill friction stir spot weldsZ.Shen,Y.Ding,J.Chen,B.Shalch Amirkhiz,J.Z.Wen,L.Fu,A.P.Gerlich摘 要:Defect-free dissimilar Al/zinc coated steel and Al/AlSi coated steel welds were successfully fabricated by refill friction stir spot welding. However, Al alloy and uncoated steel could......
of AZ31/MB3, due to the partial penetration of bottom surface. With current of 90 A, fracture occurs at the fusion zone of joint and the fracture line is indented, which indicates reliable joining of dissimilar... J. Cent. South Univ. (2018) 25: 1358-1366 DOI: https://doi.org/10.1007/s11771-018-3832-6 Effect of heat input on microstructure and mechanical properties of butt-welded dissimilar magnesium alloys......
Stirring brazing of dissimilar Al/Mg alloy without flux in airHui-Bin Xu1,2,Hui-Bin Sun1,2,Hong-You Chen1,21. School of Materials Science and Engineering, Chongqing University of Technology2. Chen State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology摘 要:AZ31B magnesium alloy and 2024 aluminum alloy were successfully......
Article ID: 1003-6326(2005)06-1322-06 Effects of pyrolysis temperature and fillers on joining of ceramics via silicone resin SUO Jun(所 俊), CHEN Zhao-hui(陈朝辉), ZHENG Wen..., China) Abstract: The joining of graphite, ceramic SiC and Cf/SiC composites via preceramic silicone resin(SR) at high temperature (800-1400℃) was studied. The curing and pyrolysis process of SR......
