共搜索到80036条信息,每页显示10条信息,共8004页。用时:0小时0分0秒656毫秒
mechanical property, various alloying elements have been added to Mg-Li alloy systems. Among Mg-Li alloy systems, Al and Zn were the most widely used elements in alloying process due to the formation... Xiao-dong, JIANG Jun-wei, XIE Wei-dong, CHEN Yuan-fang, WEI Guo-bing. Effect of Sr content on microstructure and mechanical properties of Mg-Li-Al-Mn alloy [J]. Transactions of Nonferrous Metals Society......
crystallographic texture gradient in Al-Li-Cu-Zr alloy[J]. Metal Trans, 1988, 19A: 731-734. [13]魏齐龙, 陈铮, 王永欣. 1420铝-锂合金的各向异性[J]. 中国有色金属学报, 2002, 12(3): 573-577. WEI Qi-long, CHEN Zheng, WANG Yong-xin. Anisotropy...金在航空航天工业中的大量推广应用. 从20世纪90年代开始, 西方各国在实施低成本发射装置, 超轻油箱计划以及重复使用的航天器核心计划中, 以改善合金强度, 各向异性, 热稳定性为出发点, 加强了Al-Li合金的研究, 成功开发了2094, 2096, 2097, 2195, 2197等一系列改进型第三代铝-锂合金. 其中, 2197合金已取代2124合金用于F-16战斗机的后隔框, 显著地改......
(a)),而Cu/Li比较低的2196铝锂合金保温3~7 h才出现T1相析出的第一个各向异性X射线散射条纹(见图7(b)),即说明Cu/Li比较高时,T1相析出孕育期较短[32]. 图6 T8态时效1460铝锂合金SAED谱及TEM照片[23] Fig. 6 SAED patterns and TEM images of T8-aged 1460 Al-Li alloy...;Influence of small addition of RE elements on Al-Cu-Li alloy strength 微观组织分析表明,在添加微量Sc,Ce,Er等RE元素的Al-(3.5-4.3)Cu-1.2Li-X铝锂合金(X代表其它微合金元素)中,T1相和θ′相数量减少,即含Cu时效强化相T1相及θ′相析出分数降低[68-71].在低Li含量Al-Cu-Li系铝锂合......
......
for Li batteries [J]. J Alloy Compd, 2011, 509: 7915-7921. [8] WANG L, LI J G, CHI N, YU H Y, DONG T. Comparison of electrochemical performance of LiNi0.7Co0.15Mn0.15O2 with different surface... of LiAl1/3-xCoxNi1/3Mn1/3O2 compounds for lithium-ion batteries [J]. J Power Sources, 2006, 160: 1287-1293. 过渡金属对锂离子电池正极材料Li[NixCoyMnz]O2 (0.6≤x≤ 0.8)结构和电化学性能的影响 潘成迟,朱裔荣,杨应昌,侯红帅,景明俊,宋维鑫,杨旭明,纪效波 中......
in the T8 aging, the strength of the T8-aged alloy is therefore enhanced. Key words: Al-Li alloy; mechanical property; microstructure 锂是密度最低的金属元素,在铝合金中每加入质量分数为1%的锂,可使铝合金密度降低3%,刚度提高6%.在航天领域,据推算,航天运载器每减...)).固溶后时效态呈带状晶粒组织,晶粒沿轧制拉长;而厚度方向晶粒尺寸非常小(图2(c)). 图1 1460铝锂合金T6及T8时效时力学性能随时效时间变化的关系曲线 Fig. 1 Mechanical properties of 1460 Al-Li alloy as function of T6 and T8 aging time 图2 1460铝锂合金金相照片......
temperature of A356 alloy with Li addition is decreased and the eutectic temperature depression with 0.3% Li addition is decreased by 2.9 °C in cast-iron mold. The mixing enthalpies of Li with Si and Al... in Al-Si alloys [J]. Journal of Materials and Science, 2008, 43: 3009-3027. [2] WU Y P, WANG S J, LI H, LIU X F. A new technique to modify hypereutectic Al-24%Si alloys by a Si-P master alloy [J]. Journal......
冷轧工艺对Al-Mg-Li合金力学性能的影响马龙舟,崔建忠,张晓博冶金部钢铁研究总院东北大学摘 要:本文研究了冷轧工艺对01420合金力学性能的影响.结果表明.合金经过退火及包铝处理后,冷轧性能得到改善,合金具有较好的综合力学性能.文中还分析了冷轧工艺对合金强度及塑性的影响.最后得出冷轧变形率与合金力学性能达到最佳匹配的冷轧工艺关键词:Al-Mg-Li合金;力学性能;冷轧变形率;......
Cell parameters and phases of La0.7Mg0.3Ni2.8Co0.7?xAlx hydrogen storage alloy 晶胞体积的增大主要是由于Al的原子半径大于Ni和Co的原子半径引起的,同时也表明,x值在一定范围内变化时,Al元素可以线性固溶于La2Ni7相中,但随着Al含量的继续增加,La2Ni7相晶胞逐渐膨胀,能量逐渐升高... Charge-discharge cycle curves of hydrogen storage alloy electrodes: (a) La0.7Mg0.3Ni3.5?xAlx; (b) La0.7Mg0.3Ni2.8- Co0.7?xAlx 由此可见,对这两种体系合金,较低的Al替代量可改善合金的最大放电容量和循环性能,而过高的Al含量不利于合金电化学性能的提高.结合合金相结构的分析可以......
元复合微合金化Al-(3.2~3.8)Cu-(1.0~1.4)Li合金的显微组织和力学性能 李劲风1,刘平礼1,陈永来2,张绪虎2,郑子樵1 1. 中南大学 材料科学与工程学院,长沙 410083; 2. 航天材料及工艺研究所,北京 100076 摘 要:为开发新型超高强铝锂合金,研究T8态时效处理的Mg,Ag,Zn复合微合金化Al-(3.2~3.8)Cu-(1.0~1.4)Li合金的... Technology, Beijing 100076, China Received 22 September 2014; accepted 28 December 2014 Abstract: To develop super-high strength Al-Li alloy, the microstructures and mechanical properties of Mg, Ag and Zn......