共搜索到36条信息，每页显示10条信息，共4页。用时：0小时0分0秒624毫秒
are larger than those by fine cutting bites. Fig.3 Cutting force of each bite in whirling ring: (a) 1st bite; (b) 2nd bite; (c) 3rd bite; (d) 4th bite; (e) 5th bite; (f) 6th bite It is observed......
, which is more obvious under high vertical pressure. When it is applied with the SaS, the movements of the particles are mainly dominated by the rotation, and the bite cooperation between.... With internal adjustment of the particle structure near the contact surface, particles are sorted, reorganized and bite densely, the shear stress increases rapidly and the vertical displacement......
-substrate, β is the bite angle, θ is the neutral angle, and l is the contact arc length. According to the formula, the bite is more favorable when the roll radius is larger and the KP height is lower. After......
. [11] Brooke K. Functional design puts the bite into hard and refractory metals[J]. Metal Powder Report, 2003, 58(11): 20-25. [12] Watts J. Development of novel materials for mining applications[J......
stretch into anchoring length. Thereafter, brittle failure occurs at ultimate bonding stress, which depends mainly on friction force and bite force. (4) Down stage (Pu-Pr): The bond resistance drops......
with BiTe prepared by HPHT [J]. Solid State Communication, 2006, 138: 580-583. [10] YANG Jun-you, FAN Xi-an, ZHU Wen, BAO Si-qian, et al. Microstructure control and thermoelectric properties improvement......
. Functional design puts the bite into hard and refractory metals[J]. Metal Powder Report, 2003, 58(11): 20-25. [5]张剑红, 席锦会, 刘宜汉, 等. 尖晶石基铝电解惰性阳极的研究进展[J]. 有色矿冶, 2004, 20(1): 20-22. ZHANG Jian-hong, XI Jin......
of compression. Also, for roughened foil with LCO, active and conductive materials are distributed to bite into its surface. Next, the roughened foil with LFP is in the high-adhesion state because slurry......
. 1, the solid copper strip and molten aluminum are fed into the roll bite of the twin-roll caster simultaneously. Then, Cu/Al clad strip is fabricated by combining the rapid solidification with hot......
thickness is identical, the change of reduction has an influence on the bite angle (see the black line and red line in Fig. 2(b)), and further affects the angle between radian force and normal direction......
