共搜索到6273条信息，每页显示10条信息，共628页。用时：0小时0分1秒125毫秒
Trans. Nonferrous Met. Soc. China 22(2012) s619-s623 Friction stir butt welding of A5052-O aluminum alloy plates Sung-Ook YOON1, Myoung-Soo KANG1, Hyun-Bin NAM1, Yong-Jai KWON1, Sung-Tae HONG2, Jin... of Ulsan, Ulsan 680-794, Korea; 3. Technical Research Laboratories, Shin Young Co., Ltd., Yeongcheon 683-360, Korea Received 21 May 2012; accepted 5 November 2012 Abstract: Friction stir butt welding......
Trans. Nonferrous Met. Soc. China 22(2012) s634-s638 Fabrication of SiCp/AA5083 composite via friction stir welding Byung-Wook AHN, Don-Hyun CHOI, Yong-Hwan KIM, Seung-Boo JUNG School of Advanced... and mechanical properties of SiCp/AA5083 composite fabricated by friction stir welding (FSW) were investigated. The influence of the number of FSW passes on the distribution of SiC particles and mechanical......
Friction stir welding of 5052 aluminum alloy plates Yong-Jai KWON1, Seong-Beom SHIM2, Dong-Hwan PARK2 1. School of Materials Science and Engineering, University of Ulsan, Ulsan, Korea; 2...; Abstract: Friction stir welding between 5052 aluminum alloy plates with a thickness of 2 mm was performed......
......
and microstructures, hardness, lap shear performance and failure mode of friction stir lap welding on AA6061-T6 Al alloy with 5 mm in thickness was studied by field-emission scanning electron microscopy (FE... by EDX. Key words: aluminum alloy; friction stir lap welding; mechanical properties 1 Introduction Since 1991, friction stir welding (FSW) was introduced to the industry. This solid-state joining method......
Effect of viscosity on material behavior in friction stir welding process ZHANG Hong-wu(张洪武), ZHANG Zhao(张 昭), BIE Jun(别 俊), ZHOU Lei(周 雷), CHEN Jin-tao(陈金涛) State Key Laboratory...-dependent elastic viscoplastic material model was used for the numerical simulation of the friction stir welding process. The non-elastic response of the rate-dependent material in the large......
Tool-workpiece interaction and shear layer flow during friction stir welding of aluminium alloys Z. W. CHEN, S. CUI Department of Mechanical and Production Engineering, AUT University, New...; Abstract: Material flow phenomena during friction stir welding (FSW......
parameters. The present study focused on the effect of tool tilt angle on strength of friction stir lap welding of AA2014-T6 aluminium alloy. The tool tilt angle was varied between 0° and 4° with an equal... tool tilt angles of 1° and 3° yielded inferior lap shear strength due to unbalanced material flow in the weld region during FSW. Key words: AA2014 aluminium alloy; friction stir lap welding; tool tilt......
......
Mechanical properties of underwater friction stir welded 2219 aluminum alloy LIU Hui-jie(刘会杰), ZHANG Hui-jie(张会杰), HUANG Yong-xian(黄永宪), YU Lei(于 雷) State Key Laboratory of Advanced Welding...; Abstract: Underwater friction stir welding of 2219 aluminum alloy was carried out in order......
