共搜索到3953条信息,每页显示10条信息,共396页。用时:0小时0分0秒734毫秒
to produce inner door panels, using a two-step laser welding operation to obtain 140 mm deep drawing depth without breaks in the laser welded seam (Fig. 8(b)). Geometrical accuracy of stamped panels......
be constructed and expressed in terms of the parallelism of the matching rows and near parallelism of the matching planes. The accuracy of the OR and the orientation of the interface can be further refined......
cleaned with acetone, dried and then measured through sensitive weighing method by an analytical balance having an accuracy of 0.1 mg before and after the wear test in order to calculate the amount of wear......
in an unbaffled stirred tank, and an accuracy of 0.5% for the concentration measurement was observed. The measuring principle was that a beam of measuring light is sent out from the probe to the fluid......
. In order to evaluate the accuracy of the developed constitutive equation, the error (e) between the calculated flow stress (σc) and measured flow stress (σm) can be calculated as  ......
. The experiments were performed on a TOYO BD-350V5 cold chamber die casting machine incorporated with a self-improved TOYO vacuum system. A KEYENCE pressure sensor with the accuracy of 0.1 kPa was mounted......
and accuracy of the criterion proposed in this work, the confirmation experiments are performed and simulated by choosing the casting with different configuration and pouring process parameters. Figure 6......
to 27623, the satellite geometry is very poor. The accuracy of the results is very low. Some results are not reliable so that the difference between the coordinates becomes large. In that case it can......
accuracy of ±2 K, starting from room temperature (about 20 °C). One set of the samples for C1 was heated at 50 °C/h to 450 °C and kept for 4 h, referred to as C1-2. Another set of the samples......
TSVM和PTSVM平均高2.00%.对于two-moons-2,ARLEBTSVM测试精度比TWSVM和PTSVM平均高出2.25%.这表明,当数据集的拓扑结构变得更加复杂而不规则时,本文ARLEBTSVM仍然保持较好的泛化性能. 表1 TWSVM,PTSVM 和 ARLEBTSVM算法的测试精度比较 Table 1 Classification accuracy......