共搜索到3496条信息,每页显示10条信息,共350页。用时:0小时0分0秒749毫秒
directionally solidified under different melt superheats and transient heat flow conditions [J]. Materials Science and Engineering A, 2017, 685: 235-243. [24] KAYA H, CADIRLI E, GüNDüZ M, ULGEN A. Effect......
regime, two wear mechanisms were observed (oxidation and delamination). As for the severe regime, melt wear due to severe plastic deformation was observed. SHANTHI et al [1] investigated the effect......
resistance of cast AZ31B Mg alloy plates produced by disintegrated melt deposition (DMD) technique and reported that the addition of lead as reinforcement enhances the ballistic resistance......
performance Mg/MgO nanocomposites[J]. Journal of Composite Materials, 2007, 41(19): 2325-2335. [17] FAN Z, WANG Y, XIA M, et al. Enhanced heterogeneous nucleation in AZ91D alloy by intensive melt shearing[J......
, BEAUGNON E. Liquid-liquid structure transition in metallic melt and its impact on solidification: A review [J]. Transactions of Nonferrous Metals Society of China, 2020, 30: 2293-2310. 液态Mg-Si系中混合焓与结构序之......
placed a emphasis on in situ reactive infiltration technique, and by using this method, the reinforcement can be in situ synthesized and simultaneously Mg melt infiltrates the preform [17]. Many......
net shaping (LENS) based on synchronous powder feeding is one of the AM technologies for metal materials [8-10]. This technique uses high-energy laser beam to melt the synchronous feeding metal powder......
to protect the melt pool and heat affected zone, as shown in Figure 1(b). The specimens were built on a substrate at dimensions of 200 mm×100 mm×5 mm with a composition as the same as the filler wire......
-qiang, et al. Electrodeposition of RE-TM (RE=La, Sm, Gd; TM=Fe, Co, Ni) films and magnetic properties in urea melt[J]. Journal of Alloys and Compounds, 2008, 477(1): 547-551. [21] QIN Xiu-fang, SUI Cai......
), and the particle size distribution is D10=3.3 μm, D50=10.2 μm and D90= 28.0 μm, as presented in Figure 2(d). During the water-gas combined atomization, the melt liquid of copper is broken up in two steps, i.e.......